Hello, I'm Crafter Wong and I make Pokemon Papercrafts and BTD 6 models and maybe other stuff if you ask... maybe. I have to admit I'm getting a little burned out with upload so I am going to be taking a break. Don't worry I have posts prepped until the end of August. Don't know if I will return. There are easter eggs around my website on what I'm going to be releasing so have fun finding them!!
Saturday, March 28, 2020
Wednesday, March 25, 2020
Chibi Ho-oh
Models Details
Height: 3 in / 7.6 cm
Width: 3.5 in / 8.9 cm
Depth: 4 in / 10.2 cm
Notes: The model seems pretty straightforward. You may want to cut the top part of the neck to make it easier to connect the head to the neck. Also, add a weight in the back of the model and angle the tail to get the model to stand properly. Lastly, I decided to make the 3D model of the Pokemon downloadable, under 3D model, and the templates are downloadable under download. Besides that enjoy building!
Wednesday, March 18, 2020
Chibi Lugia
Model Details:
Pages: 1
Height: 2.24 in / 5.7 cm
Width: 3 in / 7.62 cm
Depth: 4.16 in / 10.6 cm
Notes: Build the body and head separately. In order to get the model to stand, put a weight near the legs and use the tail to make a tripod with the legs to make the model stand. Glue the head on as if you are making the PDO then tilt it until it reaches the desired angle.I still do not know how to make the back hairs the same color so you will need to print the back hair twice and connect them back to back so the color is on the outside. Enjoy building!
Wednesday, March 11, 2020
Chibi Palkia
Model details:
Pages: 3
Height: 4 in / 10.2 cm
Width: 3.7 in / 9.4 cm
Depth: 6 in / 15.2 cm
Notes: The model is pretty straightforward. You may need to trim the neck add-on to fit the back of the body and add a small weight near the back of the model to get it to stand by itself. Besides that enjoy building!
Wednesday, March 4, 2020
Captain Falcon Kirby
Model Detail:
Pages: 2
Height: 3 in / 7.6 cm
Width: 3.3 in / 8.3 cm
Depth: 2.77 in / 7 cm
Download: Templates
Notes: The model is quite straightforward. The only problem that may occur is attaching the body to the helmet. I suggest attaching the top part of the body to the top part of helmet and then finish attaching the part at the bottom of the helmet. Besides that have fun building!
Subscribe to:
Posts (Atom)