Chibi Eelektrik

 

Commentary:

Again, I used it briefly doing through a runthrough of Black and White and all I can say is it did its job. I do know that in the TCG in the black and white set there was a eelektrik with the ability Dynamotor that attached an extra electric energy to one of your Pokemon and this card was used quite a lot. Never personally used it but it was a pretty good card.

Pokedex Entry:

According to the pokedex, this Pokemon has a big appetite and when they see their prey, they wrap themselves around its prey with its electricity from its round spots paralyze their prey. Eelektrik then

proceed to chomp its prey and begin eating.

Fun Facts:

1. This Pokemon and its evolutions are the only Pokemon without a weakness

2. Elektrik is the only Pokemon in its evolutionary line to learn a move through level-up

Model Details:

Pages: 1

Height:  2.65 in / 6.73 cm

Width: 1.12 in / 2.84 cm

Depth: 3.00 in / 7.62 cm

Download: 3D Model / Templates

Notes: I sort of messed up with the design of this model. In order to get the model to stand you either have to prop the model on top of something or (like in the picture above) use the bottom fin to get the model to stand by itself. Besides that, I hope you enjoy building and stay tuned!

Chibi Tynamo

 

Commentary:

I mean to get Electross, I have to use this Pokemon. It was alright, I just remember spamming Spark with this Pokemon. The only question I have about this Pokemonis if this Pokemon a land dwelling Pokemon or if this Pokemon lives in the sea as the Pokemon has a fish like look. After making the textures for the shiny version of this Pokemon, all I have to say is that it is terrible. The yellow stripe just changes to orange🤔.

 

Pokedex Entry:

This Pokemon is somewhat like Whish Washi. According to the Pokedex, alone, Tynamo does not have too much power, but together, as a school of Tynamo, these Pokemon can release a powerful shock.See this is what I mean I do not know if this Pokemon is basically the fish of the land but rather levitate/fly instead of swim?

 

Fun Facts:

1. Tynamo is the lightest Electric type Pokemon

2. Tynamo can only learn Normal and Electric Type. Therefore the only way Tynamo can damage a Ghost/Ground type Pokemon, which doesn't exist, is through using struggle

Model Detail:

Pages: 1

Height: 1.31 in / 3.33 cm

Width: 0.81 in / 2.06 cm

Depth: 2.39 in / 6.07 cm

Download: 3D Model / Templates

Notes: This model is not difficult to build as you start at the mouth and work your way toward the tail. A few things to take note of though

• For the big fin. there are two sections. You can glue the white side of the sections together or use the tabs to connect the two pieces. (I prefer the first option)
• Once the fin is made you, to get the model to stand, you will need to fold it so the piece is one fin on the top.
• You may need to either make a dent at the center place of the model or place a small weight in the model to get the model to stand by itself

Besides that, I hope you enjoy building and stay tuned!

Chibi Eelektross

 

Commentary:

I really like this Pokemon.  A standing electric eel with the ability levitate what could go wrong. Has decently deep move pool with alright defense. Unfortunately, its speed stat is shot, but I don't really care. I used it a quite a few runs in Black and White and this Pokemon work do hefty amount of damage to a lot of its opponents it would face. I know in Showdown you use to be able a choice specs set of volt switch, giga drain, flamethrower, or thunderbolt and puncha pretty big hit on your opponents but I don't know how relevant it was. Overall pretty, cool Pokemon, good work GameFreak.

Also, in my opinion this looks like one of my neater builds.

 

Pokedex Entry:

Holy Poop! This Pokemon is like an evil sea monster in horror movies. According to the Pokedex, Electross crawls out of the ocean with its arms and attack its prey on

shore and immediately drag them it into the ocean. How does it attack its prey? Well, it latches its prey with its mouth shocking them with powerful electricity

through its fang.

 

Fun Facts:

1. With the introduction of fairy, Electross is the only Pokemon with no weaknesses

2.Funny enough despite its Pokedex entry of shocking its opponent by using its fang, Electross is not capable of learning thunder fang

3. Electross can easily be seen to be based off of an eel but Electross could have been based off of the knifefish, the lamprey or leeches.

Model Details:

Pages: 2

Height: 3.00 in / 7.62 cm

Width: 2.68 in / 6.81 cm

Depth: 4.22 in / 10.72 cm

Download: 3D Model / Templates

Notes: This model is not difficult to build at all. I have included a Edge ID which shows where each tab goes in the model. Build the model from the mouth down to the tail and then attach the fins to the model. For the fins, they are two 2d and should glue the white sections of those pieces together. Lastly, make sure to place a weight in the model to get it to stand by itself. Besides that, I hope you enjoy building and stay tuned!

Chibi Zeroara

 

Commentary:

Never used this Pokemon. I had to look up the name of this Pokemon when someone requested that I make this Pokemon, so I have no story to give about this Pokemon. Apparently Zeroara is an electric type mythical Pokemon that was introduced in Generation 8 and looks a tad bit like a cat like furry.

 

Pokedex Entry:

According to the Pokedex, Zeroara is quite aggressive. It is said that Zeroara approaches its enemy with lightning speed then it tears opponent limb from limb with its sharp claws. Even if the Pokemon dodges the attack, the Pokemon will be electrocuted by the flying sparks

 

Fun Facts:

1. The name of Zeroara is a combination of Zeus and tora which means tiger in Japanese

2. Zeroara is the only electric type Mythical Pokemon

3. Zeroara is said to have been born in an explosion caused by a Lightning bolt

Model Details:

Pages: 2

Height: 2.75 in / 6.99 cm 

Width: 1.80 in / 4.57 cm

Depth: 2.31 in / 5.87 cm

Download: 3D Model / Templates

Notes: 

• I have included an edge ID pdf. This will tell you which edge each tab connects to.
• For the blue lightning bolt, I did not use the tabs. I just glue the white parts of the each side lightning bolt (there are two, one for the front and one for the back)
• I am missing a front right belt piece on the model I have no idea where it went
• The most difficult part is building the tail. Take your time when building it and follow the PDO file or edge ID pdf. YOU DO need to build the tail as that is how you will get the model to stand by itself.

Besides that, I hope you enjoy building and stay tune!

Chibi Mega Ampharos

 

Commentary:

It is Ampharos with hair. After the YouTuber Haydunn used a Mega Ampharos in one of his teams and named it Jafar all I can think about when someone says "Jafar" is Mega Ampharos and vice versa.

Pokedex Entry:

According to the pokedex, excess energy from mega evolving awakens its long-sleeping dragon blood which allows Ampharos to grow wool it has lost. I did not realize that growing wool makes you a dragon type pokemon, but hey its pokemon.

 

Fun Facts:

1. It has the highest special defense of all electric types

2. Ampharos was a orginally a Dragon type in developement of Gold and Silver.

Model Details:

Pages: 3

Height: 3.20 in / 8.13 cm

Width: 3.08 in / 7.82 cm

Depth: 3.45 in / 8.76 cm

Download: 3D Model / Templates

Notes: This model has a little bit more complex build steps so if you any questions regarding building the model, refer to the video down below. Also, use the white part on the tail with the two legs to crate a tripod allowing the model to stand. Besides that, I hope you enjoy building and stay tuned!

Chibi Zekrom

 

Commentary:

Cool Pokémon, preferred it over reshiram and actually had it on my team during the first run of Pokémon white. It was pretty good and I enjoyed using it. Unfortunately this would be my last legendary Pokémon I would use on any team

Pokedex Entry:

According to the Pokédex, Zekrom can scorch the earth with lightning and flys around unova in a lightning cloud. Zekrom creates electricity through its tail and wants to assist those who want to build an ideal world. Ideal world in someone’s perspective (so like Thanos) or ideal world in Zekroms perspective.

Fun Facts:

1. Zekrom has the highest base attack stat of all electric types

2. Zekrom and Reshiram is based on the concept of Yin and Yang

3. Zekrom is the heaviest Electric type Pokemon

Model Details: 

Page: 2

Height: 3.75 in / 9.53 cm

Width: 4.74 in / 12.04 cm

Depth: 4.33 in / 11.00 cm

Download: 3D Model / Templates

Notes: This model is not too and to build. Refer to the video down below if you need help building the model. Some specific details regarding this model is to color the back of a tail piece that looks like this [ color the white side of this piece so match’s the tail color. Also you do no need to place a weight in the model to get the model to stand. Play with the angle of the tail to get the model to stand by itself. Besides that, I hope you enjoy building and stay tuned!

Chibi Pichu

 

Commentary:

The first Pikachu esk Pokemon in the every generation (do I count Marill....nah not electric type). As an introduction to baby Pokemon I have to admit this Pokemon is pretty cute. I also I have to admit that the art style from the TCG card from Heartgold Soulslilver set is perfect. I have no idea where I am going with this, but this Pokemon is not too bad.

Fun Fact:

1. There are two special types of Pichu known as the spiky-eared Pichu and the Ukelele Pichu

2. There 8 different types of Pichu that wear a hat in Pokemon Go

3. Pichu is one of the easiest Pokemon to capture in Pokemon Ranger with one circle

Pokedex Entry:

According to the Pokedex, Pichu can store small amount of electricity in its cheek and it becomes shocked when a little amount of electricity leaks. Furthermore, when surprised or excited it may discharge electricity shocking itself or even an adult human.

Model Details:

Pages: 1

Height: 2.25 in / 5.72 cm

Width: 1.75 in / 4.45 cm

Depth: 1.86 in / 4.72 cm

Download: 3D Model / Templates

Notes: This model is not too difficult. Build the entire head attaching the ears before closing the head. Then build the body and attach the completed head to the body. If needed play with the placement of the tail to get the model to stand. Besides that, I hope you enjoy building and stay tuned!

Chibi Raikou

 

                                              Entei             Suicune 

Burned tower coming soon.        

Commentary:

I have to admit Raikou is one of my favorite legendary Pokemon. In my opinion, it just looks super cool; A legendary black and yellow dog with a hint of purple and blue sign me up. I think based off this opening sentence you would think I would have used it while playing through Soulsilver or Heartgold at least once and have funny story to tell. But nope. I only used legendary Pokemon in my main team when Istarted playing Pokemon Diamond (I went back to play FireRed and Emerald but Diamond was my first Pokemon game). Even the shiny Raikou I got from the mystery gift event; I never have used as it is still level 30. If I ever have the time to rerun Heartgold or Soulsilver, I may need to use this Pokemon just to because.

Pokedex Entry:

Alright, the Ho-oh myth is still in tacted after reading's Raikou's pokedex entry. According to the Pokedex, Raikou carries a rain cloud on its back (I'm assuming the purple thinggy on its body) allowing Raikou to shoot thunderbolts at will. Furthremore, it is known that its bark sounds like crashing thunder. Well, those are the two entries for Raikou. After reading the entries, I am given the vibe that Raikou is just Zeus but as a dog. Just my two cents.

Model Details:

Pages: 2

Height: 2.85 in / 7.24 cm

Width: 1.85 in / 4.70 cm

Depth: 4.27 in / 10.85 cm

Download:3D Model / Templates

Notes: This model is not too difficult to build. Build the head, body, and other parts separately and attach them together once you are done building. Before closing the body, place a small weight inside so the model can stand by itself. Besides that, I hope you enjoy building and stay tuned!

Chibi Magneton

Commentary:

I like this Pokemon for nuzlockes. I do not remember what nuzlocke I was playing, I think it was a randomizer for HeartGold, but this Pokemon is great for nuzlockes. It seemed to always tank hits, just do not accidently leave it in againist a ground, fire, or fighting type move like I did😅, and despite having a poor move pool of shock wave, thunderbolt, and flash cannon and toxic Magneton seemed to do the job for me, destroyed any water-type section of the game I used it in. Even though people may complain about Magneton has a boring design, I like the Pokemon. It tanks a lot of moves, has a decent move pool and I actually like the design of this Pokemon, I cannot really explain this one🤷‍♂️.

Pokedex Entry:

So most of the entries seem to make sense. According to the Pokedex, Magneton is the coming together of three magnemite... duh doh thank you captain obvious. I like how in Pokemon Sun the pokedex states that when they combine the brains of the three Pokemon combine into one, but they do not combine intelligents. I find it quite funny the Pokedex goes out of its way that Magneton does not become smarter when it evolves. Magneton also generates electrical signals that disturb local electronics and for some reason raises the temperature by 3.3 fahrenheit. I assume this occurs because it overheats whatever electronic it is interfering with. The only entry I do not understand is that this Pokemon occurs more frequently when a sunspot occurs. What does this Pokemon have to do with the sun? I actually cannot think of a reason why this were to occur. I would like to hear your ideas below (if you someone read this far).

Model Details:

Pages: 1

Height: 2.45 in / 6.22 cm

Width: 2.85 in / 7.24 cm

Depth:1.55 in / 3.94 cm

Download: 3D Model / Templates

Notes: This model is not to complicated to build. Build the main body, the three Magnemite bodies, then build and attach the nails and magnets to the body. Play with the locations and angles of the magnets to get the model to stand by itself. Quick option. You can build the magnets as 2D by gluing the top of the magnet directly to the bottom of the magnet or build the magnets as 3D by gluing the templates at intended. I built half the magents 2D and the other half 3D. I recommend building the magnets in 2D as it saves a good amount of time. Besides that I hope you enjoy building, and stay tune for more!

Chibi Lanturn

 

Commentary: 

I have never used this Pokemon because I thought Chinchou sprite looked, how do I say this nicely, stupid. Yep, what a great reason for never using a Lanturn in a playthrough. As I have grown older, I have started to gain a desire to use this Pokemon in the next playthrough. The reason for this new desire is I have been watching Pokemon Challenges nuzlocke Kaizo Emerald and he has used Lanturn many time to defeat Watson. The rules he has in place make the game very very very hard, considering how hard the game is already. I find it kinda of funny how despite all these difficulties, Watson still decides to use thunderbolt against Lanturn even though it has Volt Absorb. This reminds of when Chuggaconroy's run through Pokemon Gale of Darkness when the A.I. kept using normal-type moves against Misdreavus. Also, is it me or does Lanturn looks like a combination of Dory and the fish that uses its light as bait to lury in its prey.

Pokedex Entries: 

I mean I do not know what to make of Lanturn of this Pokemon. It has a pretty graphic entry like Lanturn blinds its prey with an intense burst of light and when the prey is incapacitated, the Pokemon swallows it in a single gulp. It has a scientific entry saying that the bacteria in its body allows the a strong luminscent effect to occur. It has a cute entry saying that it is nicknamed the "The Deep-Sea Star" due to its ability to illuminate the sea surface from a depth of three miles. Overall, I think they are solid and Lanturn is just like what I think it would be.

Notes:

Pages: 1

Height: 2.17 in / 5.51 cm

Width: 2.50 in / 6.35 cm

Depth: 2.52 in / 6.40 cm

Download: 3D Model /Templates

Notes: I built the model from the left to the right and close the model at the piece with no tabs that is located on the underside of the model. The light on the top is a little difficult to build but just let the glue dry after each attachment. I added a small weight, I used an eraser cap, and I played with the angle of the tail to have the model stand up properly. Besides that I hope you enjoy building and stay tune!

Chibi Regieleki

 

Commentary:

I like it. This Pokémon looks aesthetically pleasing I do not why. It may be the yellow symmetrical look mirror electric currents, but ehh. I really like the Pokémon company creating more Pokemon to go with past legendary Pokemon. I prefer this compared to new forms to old legendary Pokemon. cough** cough** Zapdos cough*** Moltres cough*** Articuno cough*** cough*** sorry I had to cough while you were coincidentally reading this. New legendary Pokemon to go with past legendaries just seems right as it creates new Pokemon while pulling on the string of nostalgic fans. Besides that, I actually have no clue if this Pokemon is usable. I believe this Pokemon acts as a glass cannon with its astounding speed stat and the option to be physically or specially attacking. The only thing I do not really like about this Pokemon is that it is two foot eleven inches. I feel like the Regis should be intimating figures, but this Regieleki cannot be intimidating when being so short.

Pokedex Entry:

Well, this section will be easy to type as there are only two Pokedex entries. According to the Pokedex, Regieleki has the power to generate all of Galar of electricity. Okay this makes sense. A powerful legendary Pokemon that provide enough energy for an entire region (that is not suppose to be sarcastic). Apparently, if you remove Regieleki's rings it will unleash its latent power. Wait, so can Regieleki generate all of Galar's energy with or without the ring's on because if Regieleki can power all of Galar's power with the rings on could Regieleki power the whole Pokemon universe or will it produce too much power to cause a blackout in all of Galar? Just food for thought.

Model Details:

Pages: 2

Height: 2.60 in / 6.60 cm

Width: 5.37 in / 13.64 cm

Depth: 1.51 in / 3.84 cm

Download: 3D Model / Templates

Notes: Go read the notes on Paperpokes website. I am lazy and do not want to type it again. Besides that, I hope you enjoy building and stay tuned!

Chibi Thundurus

Commentary: 

The only thing I remember about this Pokemon is when I played Pokemon White and I went the route near the flying type gym leader (Route 7, I had to google this) it just rained liked crazy. I thought this was a cool feature of catching this Pokemon and I wished this occurred more often, but with roaming Pokemon (I think there is this feature for a roaming Pokemon but I do not remember who). That is all my experience with this Pokemon. In my opinion, I like the Therian version of all the Gennie Pokemon better than their normal forms. Their normal form reminds me of the meme of can I copy your homework picture but you just change it a little bit. Each genie are literally the same but just have a different tail, head piece and color pallet. 

Pokedex Entry:

Well I think this Pokemon is an evil version. According to all its Pokedex entries, this Pokemon flies around the Unova region shooting lightning bolts from its tail causing forest fires. Thundurus is therefore generally disliked. Thundurus just seems like a bored Zeus just going around causing fires for its entertainment.

Model Details:

Pages: 3

Height: 3.40 in 

Width: 2.61 in

Depth: 2.88 in

Download: 3D Model / Templates

Notes: When building the head piece start with the tip and build toward the larger part as it is easier to close with the larger piece. For the tail you will need to freehand attaching the balls to the sticks (hehehe😅). Alternating building the two pieces and attach them to general tail as you go. Once the tail is complete you will need to bend it a little bit to create the curve shape. I glued the tail in two place, the back of the body and the front of the cloud. Besides that, I hope you enjoy building and stay tuned!

Chibi Magnemite

Commentary:

I have used Magnemite many times in a playthrough and, in my opinion, it was pretty good defensively and okay attacking wise. I really like using it in nuzlockes, but hate facing them early on due to one move...sonicboom. I enjoy playing randomized Pokemon nuzlockes and you never know when or if you will face one of these before the first and arguably the second gym leader. If you do, you better hope you have a fire, fightning, or ground move on the active Pokemon because its sonicboom will most likely two shot every Pokemon you have making switching unlikely and the necessity for you to sacrifice a Pokemon. Let us just say I lost a lot of randomized nuzlocke to this Pokemon. The only other memory of this Pokemon is seeing a swarm of them in the Pokemon movie Arceus and the Jewel of Life and being amazed of how many there were. 

Pokedex Entry:

In general, most Pokedex entries of this Pokemon state that this Pokemon defies gravity allowing it float, feeds on electricity thus found near power plants or electrical lines, and acts like a magnet and can attract iron🔗 300 feet away, that's a lot of paperclips 🤪 (I assume this is something the Pokemon can turn on or off or else Magnemite would have a lot of junk surrounding it). I assume that this Pokemon acts as a battery🔋 and a magnet🧲 at the same time because one of its entries says that if you see a Magnetmite on the ground, to give it a battery so it can start moving again. I assume that it has ran out of electricity thus needs a boost.

Model Details:

Pages: 2

Height: 1.50 in / 3.81 cm

Width: 2.74 in / 6.96 cm

Depth: 1.31 in / 3.33 cm

Download: 3D Model / Templates

Notes: This Pokemon quite simple and if you are new to papercrafting I would recommend building this Pokemon. In order to get the model to stand, play with the angle and location of the magnets and nails. Lastly, if you are feeling lazy, you can make the magnets two-dimensional by just placing the two magnets piece on top of each others white sides leaving the color sides showing. Besides that I hope you enjoy building and stay tuned!

Chibi Raichu

Commentary:

 I never really used this Pokemon in game besides in Pokemon FireRed. All I remember about this Pokemon was that it was a strong electric type attacker throughout the game. The only problem with this Pokemon was that it did not learn ANY level up moves once it evolved😐, so most of the time, I just ran thunderbolt with a range of weak normal and electric type moves. When writing this I thought, nah Raichu cannot have that bad of a move-set it must be able to learn the elemental punches maybe I was just stupid as a kid to not teach it those moves, but I was wrong. The only strong moves Raichu is capable of learning are electric type moves, mega punch or kick, and dynamic punch, so I guess I could have gave it better moves besides just thunderbolt, shock wave, thunder shock and thunder wave.  Lastly a small complaint/confusion, how does Pikachu or Raichu not learn volt tackle through level-up as it is a moved used heavily in the anime 🤔(I have watched very few episodes of the anime, but Ash's Pikachu seems to use volt tackle quite a bit) I always wanted to use it in game but I would not gain the opportunity until future games.

Model details:
Pages: 1
Height: 2.40 in / 6.10 cm
Width: 1.64 in / 4.17 cm
Depth: 2.14 in / 5.44 cm

Download: 3D Model /Templates
Notes: Just use the tail to help the model stand. The tail will create a tripod with the two legs. Besides that the model is straightforward to build so enjoy building and stay tune!

Pikachu Papercraft

Chibi Pikachu

Model details
Pages: 1
Height: 2.66 in/ 6.8 cm
Width 1.48 in/ 3.8 cm
Depth: 2.4 in/ 6 cm
Notes: The build is very straightforward, but in order to get the model to stand use the tail to make a tripod with the legs. Furthermore, when making the tail you can just fold the tail on top of itself and cut off the tabs and any white parts that appear.

Download: 3D Model / Templates