Chibi Togetic

 

Commentary:
I actually liked using this 2nd stage Pokemon. Normally, I don't like using 2nd stage Pokemon, but this one is different. This maybe because I used Togetic a lot when Pokemon HeartGold SoulSilver
and it did a decent job. I had a feeling that togetic was decent competitively sometime and I was right. In Diamond and Pearl, Togetic was considered in the UU-tier. It ran the set baton pass,
nasty plot, roost, and hidden power flying while holding the leftovers. Yeah, that doesn't sound fun as it could set up to fire off a STAB hidden power flying or pass the stat changes off to another
Pokemon who could swept through a team.

Pokedex Entry:
According to the Pokedex, Togetic will appear in front of kindhearted people and shower them with joy dust that provides the person with happiness 

Fun Facts:
1. Togetic is tied with Vespiquen for the lowest base speed stat of all flying-type Pokemon
2. Togetic did not appear in the anime until Generation 3
3. Togetic is the only Pokemon that is in the flying and fairy egg group

Model Details:

Pages: 1

Height: 2.30 in / 5.84 cm

Width: 1.30 in / 3.30 cm

Depth: 1.46 in / 3.78 cm

Download: 3D Model / Templates

Notes: This model is a little bit difficult. Like Togepi building the head is the most difficult part. Use the edge ID pdf to help determine where each piece goes. Lastly to get the model to stand, make the two cones and attach them at the back of the model. Besides that, I hope you enjoy building and stay tuned!

Chibi Togepi

 

Commentary:
Its a pretty cute Pokemon and I like the concept in the anime that each Pokemon has a special egg and I just remember this being a prime example of this. I also find it quite funny that when this Pokemon "hatches" from it eggs, it is more like its head just breaks out of the top and the limbs pop out of the side and the egg is still part of the Pokemon. Lastly, I do remember this is the only Pokemon I cared about having the correct ability when hatching its egg in Pokemon HeartGold SoulSilver. This is because Togepi can either have the ability Hustle or Serene Grace and we all know how good Serene Grace is.

Pokedex Entry:
According to the Pokedex, Togepi is considered a symbol of good luck. Togepi uses the feeling of compassion and happiness from people and Pokemon and will share these feelings with others when treated kindly by its trainer. Furthermore, it is said that happiness will come to anyone who can make a sleeping Togepi stand up. 

Fun Fact:
1. Togepi was the second generation II Pokemon to appear in the Kanto part of the anime
2. The togepi hatched in SoulSilver or Heartgold knows the move Extrasensory which is a move it can only learn from breeding with a Hoothoot
or Noctowl
3. Togepi had the lowest base attack among all fairy type Pokemon

Model Details:

Pages: 1

Height: 1.37 in / 3.48 cm

Width: 1.49 in / 3.47 cm

Depth: 1.17 in / 2.97 cm

Download: 3D Model / Templates

Notes: This model can be a little bit difficult to build. Start from the head and attach the spikes around the head piece. This is the hardest part. Use the Edge ID document or Pepakura viewer to make sure to attach the correct tab to its respected non-tan side. After the head is built, the rest of the model is not too difficult to build. Besides that, I hope you enjoy building and stay tuned!

Chibi Porygon2

 

Commentary:

Never used this in game. I know that Porygon 2 that is much better than its final evolution Porygon Z because of eviolite and its natural bulk. I have no idea what the set it would run but I assume it would look something like it is holding the eviolite while running recover, toxic, ice beam and some other attack and with Porygon 2's great coverage this Pokemon could carry quite a variety of moves. I don't think this was too good in competitive play but I think this Pokemon is a pretty good option for nuzlocke

 

Pokedex Entry:

According to the Pokedex, Porygon was the updated with the latest technology available in order to be able to work in space and explore other planets. Surprisingly, it cannot fly (I assume it just levitates then in order to move around). Furthermore, Porygon 2 may exhibit motions not originally programmed into it. The dark entry regarding this Pokemon is that Porygon 2 created its own language, not programmed in by humans, to communicate with other Porygon 2. Well it looks like Porygon 2

is going to plot with other Porygon 2s to take over the world.

 

Fun Facts:

1. Porygon 2 is the only Pokemon with a number in its name. Yes Mewtwo doesn't count

2. Porygon 2 is the only mid-entry Pokemon that requires a trade

3. Porygon 2 is based off a bird, paper crane, or a drinking bird toy that has been rendered through computer software

Model Details:

Pages: 1

Height: 2.20 in / 5.59 cm

Width: 1.73 in / 4.39 cm

Depth: 2.52 in / 6.40 cm

Download: 3D Model / Templates

Notes:  This model is not difficult at all. Build all the objects sepeartely and then free-hand glue the parts to the body. You will need to put a small weight in the body to get the model to stand by itself. Besides that, I hope you enjoy building and stay tuned!

Chibi Mega Scizor

 

Commentary:

Its Pokemon Ironman. I have to admit I like the versatility of this Mega Pokemon. You can run it as a physical attacker holding the scizorite (I remember once I was like huh what item do I want to give mega Scizor... I hope you get the joke) running sword dances, roost, bullet punch, and knock off. I also do remember people running a defensive Mega Scizor with defog, roost, u-turn, and bullet punch. Besides the versatility of thi Pokemon, I do overall like the design of this Pokemon. I was a huge fan of normal scizor and like many other Megas its mega evolution makes it look cooler.

Pokedex Entry:

According to the pokedex, Mega Scizor arms become diabolical when it Mega evolves and ripping anything to shred with a single pinch. Well according to the Pokedex, Scizor cannot be a Mega for too long as the mega evolution energy may cause an overflow (whatever that means), it may start to melt, or the weight of its pincers become to heavy. So I have come to the conclusion Mega evolution isn't too good for Scizor

Fun Facts:

1. Mega Scizor is tied with three other Pokemon for the Bug-type Pokemon with the highest total  base stat

2. The Scizor line seems to be a parrallel to Steelix

Model Details:

Pages: 1

Height: 3.20 in / 8.13 cm

Width: 2.37 in / 6.02 cm

Depth: 2.55 in / 6.48

Download: 3D Model / Templates

Notes: This model isn't too difficult to build. IF you are building the model lineless, make sure to fold every line of the grey spikes on its forehead. Also, the last thing to attach on this model is the leg in attempt to make a tripod with the body. IF you need help building the model, I have included a video fo me making the model down below. Besides that, I hope you enjoy building and stay tuned!

Chibi Octillery

 

Commentary:

I have evolved a Remoraid to get an Octillery for the Pokedex... but that is about it. I always thought this Pokemon was not that great and would go nowhere close to my team. Unless... I have to use it in a nuzlocke in which I am happy that has not happened yet.

Pokedex Entry:

According to the Pokedex, Octillery uses its suction cups on its tentacles to trap its enemies. It then smashes them with its rock-hard head. Furthermore, Octillery likes to spray ink from its mouth so Pokemon with keen noses become lost when escaping from a situation. Odd thing is its black ink is used for cooking. Lastly, the funny thing about Octillery is that if it gets sleepy it steals the nest of a fellow Octillery. I guess it just crashes in other people's houses when they get too tired.

Fun Facts:

1. Octillery is a combination of an octopus and it has some basis on a tank or cannon

2. Octillery is the only Pokemon to learn octazooka naturally

3. Octillery may be a distant relative of omastar

Model Details:

Pages: 1

Height: 2.22 in / 5.64 cm

Width: 1.70 in / 4.32 cm

Depth: 2.07 in / 5.26 cm

Download: 3D Model / Templates

Notes: If you are interested in making this model, I have included a video of me making the model. If you have any questions, leave them down below. Besides that, I hope you enjoy building and stay tuned!

Chibi Remoraid

Commentary:

Hate me all you want but I think its just another water-type Pokemon. Nothing special and sometimes quite forgettable, but this is your favorite Pokemon don't let me change your mind. Also, for the longest time I did not understand how a fish evolved into an octopus until I realized it was a pistol evolving into a tank/cannon in which makes the evolution make more sense.

Pokedex Entry:

Known as the "sniper of the sea,"  Remoraid can shoot water out of its mouth and strike its target up 300 feet away. Remoraid will also use its water shooting ability to escape from its attacker by shooting the water out of its mouth and then use that force to swim backward. Lastly, using its dorsal fins as suction cups, it clings to Mantine's underside to scavenge for leftovers. 

Fun Fact:

1. Remoraid is based off of a revolver pistol

2. To evolve a mantyke,  a remoraid needs to be in the party when the mantyke levels up. Then the Mantyke evolves into a Mantine, but the remoraid is unaffected.

Model Detail:

Pages: 1

Height: 1.50 in / 3.81 cm

Width: 1.47 in / 3.73 cm

Depth: 2.16 in / 5.49 cm

Download: 3D Model / Templates

Notes: This model is super easy to build, First build the body from the top down and close the body. Then build and attach the fins. IF you are new to papercrafting this is a good model to start out with. Besides that, I hope you enjoy building and stay tuned!

Chibi Mega Tyranitar

 

Commentary:

Let me be honest I have no idea about this Pokemon besides it does not have the sandstream ability so for this section I giving it a 🤷‍♂️.

Larvitar

Pupitar

Tyranitar

Fun Fact:

1. Mega Tyranitar has the highest base stat of all rock-type and dark-type Pokemon

Pokedex Entry:

Due to the enormous power from Mega evolution, its back has split open. Furthermore, this Pokemon has become more ferocious that it sometimes ignores its trainers commands.

Model Details:

Pages: 2

Height: 3.50 in / 8.89 cm

Width: 2.59 in / 6.58 cm  

Depth: 3.11 in / 7.90 cm

Download: 3D Model / Templates

Notes: This model is not too difficult, just a lot of piece. If you have any question watch the video down below. Besides that, I hope you enjoy building and stay tuned!

Chibi Pichu

 

Commentary:

The first Pikachu esk Pokemon in the every generation (do I count Marill....nah not electric type). As an introduction to baby Pokemon I have to admit this Pokemon is pretty cute. I also I have to admit that the art style from the TCG card from Heartgold Soulslilver set is perfect. I have no idea where I am going with this, but this Pokemon is not too bad.

Fun Fact:

1. There are two special types of Pichu known as the spiky-eared Pichu and the Ukelele Pichu

2. There 8 different types of Pichu that wear a hat in Pokemon Go

3. Pichu is one of the easiest Pokemon to capture in Pokemon Ranger with one circle

Pokedex Entry:

According to the Pokedex, Pichu can store small amount of electricity in its cheek and it becomes shocked when a little amount of electricity leaks. Furthermore, when surprised or excited it may discharge electricity shocking itself or even an adult human.

Model Details:

Pages: 1

Height: 2.25 in / 5.72 cm

Width: 1.75 in / 4.45 cm

Depth: 1.86 in / 4.72 cm

Download: 3D Model / Templates

Notes: This model is not too difficult. Build the entire head attaching the ears before closing the head. Then build the body and attach the completed head to the body. If needed play with the placement of the tail to get the model to stand. Besides that, I hope you enjoy building and stay tuned!

Chibi Tyranitar

 

Commentary:

I'll admit this Pokemon is quite cool. I remember playing through FireRed once just to get to the post game so I can use this Pokemon and it did not disappoint. It can learn a variety of different types of moves both physical and special attacks. It has decent bulk so it does not faint to one hit. The only thing I did not like about this Pokemon was that its ability always set up the sandstorm. It was just annoying as a kid having to mash the "A" button constantly to skip that your opponent (or your Pokemon if I switched out) was buffeted by the sandstorm and I was constantly taking residual damage from something I set up.

 

Fun Facts:

1. Tyranitar has a fierce rivalry with Duraludon

2. Tyranitar is the only dark, rock type Pokemon.

Pokedex Entry:

Well this Pokemon is extremely powerful. According to the Pokedex, its body cannot be damaged by attacks so Tyranitar is eager to attack its enemy. Furthermore on one of its ramages, Tyranitar can change the lanscape knocking down moutains and bury rivers. Maps may need to be redrawn after one of its rampages. Well then.

Model Details:

Pages: 2

Height: 3.10 in / 7.62 cm

Width: 1.85 in / 4.70 cm

Depth: 2.88 in / 7.32 cm

Downloads: 3D Model / Templates

Notes: This model is quite straightforward to build. If you have any problems I have included the video of me building down below. Besides that, I hope you enjoy building and stay tune!

Chibi Pupitar

 

Commentary:

There are very few middle evolution that I liked. This one was okay. I do remember using a Tyranitar in game, so I had to have used this Pokemon before.... but I do not remember anything specific about this Pokemon. It is just another mediocre middle evolution in my opinion

Fun Fact:
1. Pupitar lives in harsh mountain ranges

Pokedex Entry:

I really like this Pupitar's entry... it is basically a rocket ready to explode. According to the Pokedex, Pupitar has shell as strong as bedrock. Furthermore, Pupitar creates gas inside its body and forcefully ejects in propelling it around like a jet. I think you can imagine this thing just flying around the place like a firework... or rocket

Model Details:

Pages: 1

Height: 2.40 in / 6.10 cm

Width: 2.00 in / 5.08 cm

Depth: 1.77 in / 4.95 cm

Download: 3D Model / Templates

Notes: The only difficult part is building the mask/eye part. Make sure to take your time building it and watching the video for help. I also recommend attaching the mask and head piece prior to closing the body. Lastly, use the two other cones to get the bottle to stand by itself. Besides that, I hope you enjoy building and stay tune!

Chibi Ursaring

 

Commentary:

Never used it, don't know how good it is for the storyline. I think there is a set where you can run a flame orb with guts and facade, but I do not know how good this was or even what tier this may work in. That is as far as my knowledge goes with this Pokemon.

Fun Facts:

1. In its orginal artwork, Ursaring had four claws, but now it has five

2. Ursaring is based off of the Asian black bear.

Pokedex Entry:

According to the Pokedex, Ursaring is quite skilled at climbing and it eats and sleeps in the treetops. Furthermore, Ursaring scratches trees that bear fruits or berries. What I don't understand about Ursaring is enjoys to snap trees with its foreleg and eats the fallen berries. Since Ursaring is so good at climbing, wouldn't it be easier to climb the trees and get the fruits and berries rather than breaking its back to snap trees.

Model Details:

Pages: 1

Height: 2.75 in / 6.99 cm

Width:  1.56 in / 3.96 cm

Depth: 2.00 in / 6.45 cm

Download: 3D Model / Templates

Notes: This model is not too difficult to build just attach all the collar pieces to the body before gluing the head on the body. After that, use the tail to create a tripod allowing the model to stand by itself. I have included a video down below of building the model so if you need help just watch the video. Besides that, I hope you enjoy building and stay tuned.!

Chibi Larvitar

 

Commentary:

I like Larvitar. Even though it evolves at level 30 and is quite difficult to train it, if not using the exp. share. Larvitar for me just has a good mixture cute and cool and I just like this. Also this is a very cute picture of Larvitar I really like.

Pokedex Entry:

Larvitar's entry is quite consistent. Larvitar is born deep underground and to come to the surface it must eat the surrounding soil. Furthermore, once Larvitar eats a large mountain, it falls asleep so it can grow. So how big is this Mountain? Is it just a big hill?

Model Detail:

Pages: 1

Height: 2.10 in / 5.33 cm 

Width: 1.14 in / 2.90 cm

Depth: 1.45 in / 3.68 cm

Download: 3D Model / Templates

Notes: This model is not too difficult to build. If you have questions watch the video down below. Besides that, I hope you enjoy building and stay tuned!

Chibi Teddiursa

Commentary:

This Pokemon looks like a baby version of Winnie the Pooh. That is about it for this Pokemon never used it in game even in a randomizer. 

Fun Fact:

1. Teddiursa uses Beedrill Pollen and fruit to make honey

2. Honey tends to be absorbed through its paws

Pokedex Entry:

If Teddiursa finds honey it cresent on its head glow. Every Teddiursa's paws are different and they lick them all the time since the paws are always covered in honey.

Model Details:

Pages: 1

Height: 2.09 in / 5.31 cm

Width: 1.53 in  / 3.89 cm

Depth: 1.41 in / 3.58 cm

Download: 3D Model / Templates

Notes: This model is not difficult at all. Build the head and body separately and glue them together once they are complete. Use the tail to balance the model so the model can stand by itself. Besides that, I hope you enjoy building and stay tuned!

 

Burned Tower

Commentary: 

For those who actually pay attention to the model numbers I forgot 130. If you look at it chronologically this will make no sense, but I have to fix my mistake somehow. Anyways, this section is going to be really bare. Cool fact is that the burned tower use to be the home for Lugia before it was destroyed.

Ho-oh     Lugia     Entei     Raikou     Suicune

Model Details:

Pages: 18

Height: 7 in / 17.78 cm

Width: 11.21 in / 28.47 cm

Depth: 9.37 in / 23.80 cm

Notes: This model is not too difficult to build, it is just big. First, build the structural walls and then build the roof. Once the walls are attached to one another and the roof is built, attach the walls to the roof. Next, build all the miscellaneous wood planks and attach them in the general spot they are suppose to be. Lastly, build and attach the grey platform. Besides that, I hope you enjoy building and stay tuned! 

Download: 3D Model / Templates

Chibi Raikou

 

                                              Entei             Suicune 

Burned tower coming soon.        

Commentary:

I have to admit Raikou is one of my favorite legendary Pokemon. In my opinion, it just looks super cool; A legendary black and yellow dog with a hint of purple and blue sign me up. I think based off this opening sentence you would think I would have used it while playing through Soulsilver or Heartgold at least once and have funny story to tell. But nope. I only used legendary Pokemon in my main team when Istarted playing Pokemon Diamond (I went back to play FireRed and Emerald but Diamond was my first Pokemon game). Even the shiny Raikou I got from the mystery gift event; I never have used as it is still level 30. If I ever have the time to rerun Heartgold or Soulsilver, I may need to use this Pokemon just to because.

Pokedex Entry:

Alright, the Ho-oh myth is still in tacted after reading's Raikou's pokedex entry. According to the Pokedex, Raikou carries a rain cloud on its back (I'm assuming the purple thinggy on its body) allowing Raikou to shoot thunderbolts at will. Furthremore, it is known that its bark sounds like crashing thunder. Well, those are the two entries for Raikou. After reading the entries, I am given the vibe that Raikou is just Zeus but as a dog. Just my two cents.

Model Details:

Pages: 2

Height: 2.85 in / 7.24 cm

Width: 1.85 in / 4.70 cm

Depth: 4.27 in / 10.85 cm

Download:3D Model / Templates

Notes: This model is not too difficult to build. Build the head, body, and other parts separately and attach them together once you are done building. Before closing the body, place a small weight inside so the model can stand by itself. Besides that, I hope you enjoy building and stay tuned!

Chibi Croconaw

 

Commentary:

It died to Whitney's Miltank😡. If you don't understand go read Totodile's entry. It's shiny looks cool though.

Pokedex Entry: 

I like this Croconaw's entry. It only has one in all its game. According to the pokedex, when Croconaw bites down, it will not let go until it loses its fang. A new fang will quickly grow in its space. Pretty cool😃.

Model Details:

Pages: 1

Height: 2.50 in / 6.35 cm

Width: 1.43 in / 3.63 cm

Depth: 2.10 in / 5.33 cm

Notes: Down below I have included a video of me making the model so you can see everything I did to make the model. Something that may be unclear in the video is that for the fangs I just cut some scrap paper into triangles and glued them in the general locations of the fang. There is the option to make the fangs 3D there is the option to, but I'm lazy😎. Also, for the red spikes I did not use the tabs but rather cut out the designated spike and glued and folded along the line of symmetry. Besides that I hope you enjoy building and stay tuned!

Download: 3D Model / Templates

Chibi Totodile

Commentary:

One day, I wanted to attempt a Pokemon SoulSilver nuzlocke. It had been a few years since I played this game and I wanted to run through the game blindly. I did not know which starter I picked so and I had quite of bit of time on my hands. I decided that the first shiny starter I got would be my starter. I think you will understand where I am going with this, but if you don't, Totodile was that starter.  Yeah...I have a shiny totodile evolution. I would have loved to say that I was able to take all sixteen gym badges and took out arguably the strongest trainer of all time with my shiny Feraligtr by my side. But yeah, I wiped to Whitney Miltanks😪. Sad times. Since then, I transferred that Totodile to another game and I have not touched that game since. And if anyone was wondering, I did manage to successfully shiny hunt for the others starts after I failed this run.

Pokedex Entry:
Totodile has a consistent entry in all games it appears in. According to the pokedex, Totodile has a habit of biting anything with its developed jaw and that even its trainer needs to be careful around it. Furthermore, its jaw can crush anything... wait anything I think you get what I am hinting at. 

Model Detail:
Pages: 1
Height: 2 in / 5.08 cm
Width: 1.22 in / 3.10 cm

Depth: 1.84 in / 4.67 cm

Notes: I'm trying to make building my models easier by making videos, so I have included the video down below. I suggest you subscribe. I do not believe it is too clear in the video, but for the teeth I just cut triangles in 2D from some scrap paper and glued them in the general location of the teeth. Besides that, the model is not too difficult to build, and you will want to include a small weight in the body to make the model easier to stand. I hope you enjoy and stay tune! 

Download: 3D Model / Templates

Chibi Noctowl

Commentary:
I know that Ash had a shiny Noctowl which was quite cool, but that is about it. I never bothered using Noctowl in any nuzlocke or any run in general. So yeah, I do not have much to say about this Pokemon. I mean the design looks alright, but nothing to cool that would give me an urge to use it. I mean this Pokemon was suggested so there must be something cool there, but I do not know personally see here.

Pokedex Entry:
Most of Noctowl's entries make sense. Over time, Noctowl has developed the ability to see in murky darkness and minimal light. Combined with its extremely soft feathers that does not produce sound when it flies, Noctowl never fails to catch its prey in the darkness. It has been given the name of "Emperor of Dark Nights." I understand that Noctowl is probably nocturnal and hunts probably around midnight, however, does Noctowl still have 100% catching its prey on nights it is not too dark and murky? I would assume that is has close to 100% catching rate but is kind of funny of thinking that Noctowl failing during not as dark days and completely flourishing in catching prey on darker days. Hey, evolution I guess. Anyways, when Noctowl needs to think it rotates its head 180 degrees. Alright makes sense. Surprisingly though, according to Ultra Sun’s Pokedex entry, when Noctowl is troubled by something, it turns its head upside down and if you do not leave it, it will peck you. What!? I know owls can turn their heads 180 degrees, so the previous entry makes sense, but being able to rotate its head 180 degrees so that its face is upside down when facing you. What is Noctowl's neck made of? 
 
Model Details:
Pages: 1
Height: 2.06 in / 5.23 cm
Width: 2.60 in / 6.60 cm
Depth: 2.70 in / 6.86 cm
Notes: This model is not too difficult to build. When making the headpiece, make the two sides and then close the headpiece by attaching both sides to the middle piece. Furthermore, to get the model to stand use the two legs and the tail to create a tripod. Besides that, I hope you enjoy building and stay tuned!  

Download: 3D Model / Templates

Chibi Entei

Commentary:

So…  in one of the early Pokemon movies (the one with all the unknowns), wasn't Entei orginally a human that got changed into the legendary Pokemon. I mean if so, doesn't that flat out reject the legend that Ho-oh revived three Pokemon (I like the theory of those Pokemon being Jolteon, Flareon, and Vaporeon). I don't know I usally just type whatever comes to my head regarding this Pokemon. I do remember this being a pain to catch it in Soulsilver when it was a roamming legendary. I remember thinking I could just put them to sleep, and they would not run from the battle, but no they still can run when they are asleep. It must be sleep walking or has some instinct to. Despite playing FireRed, I did not know I could encounter Entei in the game and never bothered trying. Also, I do have that shiny Entei Pokemon released close to a decade ago.  

Pokedex Entry:

Alright Entei's Pokedex entries are quite consistent throughout the games. Entei is said to embody the passion of magma and a new one is said to be born every time an eruption happens. Furthermore, it is rumored every time an Entei barks, a volcano erupts somewhere around the globe. So theoretically, you could create an army of Enteis by training an Entei to bark on command and then have a team determine where the new Entei was born and rinse and repeat until you have any army of a legendary Pokemon. I do have to admit these entries do takeout the mystical essence of Entei as I thought that it was a Ho-oH who revived a burning Pokemon in the burning tower thus creating the ONE and only Entei. 

Model Details: 

Pages: 2

Height: 2.90 in / 7.37 cm

Width: 2.41 in / 6.12 cm

Depth: 3.66 in / 9.30 cm

Download: 3D Model / Templates

Notes: The only difficult part of the model is building the face. First build the head but do not close the head. Then attach the grey mouth to the red eyes and finally glue the yellow part like the picture below, but make sure to glue the yellow part on top of the grey part. Close the HEAD with the piece shown below. Regarding the body, just make sure to put a small weight like a penny or an eraser cap to allow the model to stand up by itself. Besides that, I hope you enjoy building and stay tune! 

Place the grey piece inbetween the head and the yellow piece

Leave this part open until you finish building the entire head

Chibi Quilava

Commentary:

I do remember running through Soulsilver with a Quilava before. I just remember being completely surprised when it evolved at level 14 right after I defeated Faulkner. I was then pissed off that it took until level 36 to evolve it to a Typholsion because by that time in the game Quilava was falling behind the rest of my team. I feel like starters should evolve at 16 and then again at 32 or 34. It just feels more natural to me. Fun fact, Quilava was the first papercraft I made without lines. Why do I remember this? Well because I remember sitting in front of the computer to find make sure to fold every line (which is not necessary). 

                           Typhlosion               Cyndaquil

Pokedex Entry:

According to the Pokedex, Quilava is a highly nimble Pokemon that can dodge attacks while scorching its opponents. Furthermore, Quilava likes intimidating its foes by turning its back and demonstrating how ferociously its fire blazes and the heat of its flame; the stronger the flame the more ready it is to fight. When I first read about this, all I could think of is a group Quilava performing this intimidation factor like the New Zealand Rugby team's Haka prior to a match. If you have not seen this, go on YouTube and search it. The other entry is somewhat weird. According to Pokemon Silver and Pokemon FireRed, Quilava can withstand any kind of fire attack. UhhhhhhhI don't think so. I do not believe a low level Quilava will be surviving an eruption from a full health Primal Groudon in the sun. There are probably more crazy examples than the one I provided, but I cannot think of any off the top of my head. 

Model Detail:

Pages: 1

Height: 2.05 in / 5.21 cm

Width: 1.22 in / 3.10 cm

Depth: 2.46 in / 6.25 cm

Notes: This model is simple to build. When making the flames, you can just fold the white sides on top of each other causing only the color to be shown and then trim the excess white parts off. Make sure to put a small weight inside the body so the model can stand by itself. Besides that, I hope you enjoy building and stay tune! 

Download: 3D Model / Templates