4-x-x Banana Factory

 

Commentary:

I used to use this Banana farm upgrade in BTD5 all the time, but when BTD6 came out Ninjakiwi seemed to nerf this upgrade and more importantly changed the design for this upgrade. I'm fine with Ninja Kiwi nerfing this upgrade because it did seem a bit overpowered, but I have no idea why they changed the design of this upgrade. I actually liked the BTD5 tower upgrade as it looked more like a factory than this work. This isn't that huge of an issue but just my opinion of the change.

Entry:

This upgrade produces 5 creates of $300 every round. The cost of this upgrade for each difficulty is list down below

• Easy: 16,150
• Medium: 19,000
• Hard: 20,520
• Impoppable: 22,800 

Model Details:

Pages: 5

Height: 7.00 in / 17.78 cm

Width: 5.08 in / 12.09 cm

Depth: 3.85 in / 9.78 cm

Download: 3D Model / Templates

Notes: This model is very easy to build, the only difficult part of this model is building the roof. My only recommendation for the roof is to fold every line on it and the tab should line up from there. Besides that this model is quite simple and I hope you enjoy building and stay tuned!

4-x-x Bloonjitsu Ninja Monkey

Commentary:

This is my favorite upgrade and tower in the game. It is so solid and decently cheap. You can get this tower with some camo lead popping power and bloom popping power and you are set for like round 30 to like 40 or 50ish (I only played on some easy, intermediate and a couple of advanced maps but nothing to difficult) and focus on farming😜. Even though the 0-4 Ninja monkey is arguably better in battles, this upgraded monkey is still quite usable in game. Overall, I like this monkey and is quite usable and a little bit too OP at times.

Description:

Throws 5 Shuriken's at once. How does it do that? It only has two hands. Even if it stacks the ninja stars on top of each why can't it stack more. Maybe it isn't skilled enough. I do not know I am just rambling now.

Model Details:

Pages: 2  or 4

Height: 2.90 in / 7.34 cm or 4.80 in / 14.68 cm

Width: 2.38 in / 6.05 cm or 4.76 in / 12.10 cm

Depth: 1.65 in / 4.19 cm or 3.3 in / 8.38 cm

Download: 3D Model / Templates

Notes: For this model I have included two sizes. The bigger model is easier to build than the smaller one. Also, I originally I forgot to make the cape so it is a separate file from the main one. This model is somewhat difficult to build the hardest part is building the head.

First build the bottom part of the head.

Then free hand glue the eyes and red part of the model to the bottom part of the head

Then free hand glue unconnected sides to the side of the head and attach the hat last. Besides that build the body is the same as building any other of my bloons tower defense monkey. If you have not made any other ones, go check them out, but here is the basic idea. Build the body from the top down, and attach the arms as you build down. Then attach the accessories like the waistband, shoulder plates and the ninja star to the body. Then, free hand glue the legs to the body in which the legs just cover the square in which it is suppose to be. The last thing to build is the cape. You can either make it 2D or 3D it is up to you. For 2D, just make the front and back of the cape, glue them together and then trim any of the extra white parts. Anyways, play with the location of the cape in order to allow the model to stand by itself. Besides that, I hope you enjoy building and stay tuned!

M.O.A.R Glaives Boomerang Monkey

Commentary: 

I just decided to make all 4th tier towers of the boomerang monkey and this was the next one on the list. I personally never use this tower in game as I actually do not know the strengths or weaknesses of this tower. I am assuming that it is good group bloon popping power, but I prefer to use other towers to accomplish that job.

Model Details

Pages: 2
Height: 2.76 in / 7 cm
Width: 2.09 in / 5.3 cm
Depth: 2.42 in / 6.2 cm

Download: 3D Model / Templates
Notes: The body is pretty simple to build as it is similar to the other bloons tower defense monkeys I have built. My advice for the head is to build the hood of the head but do not put the piece underneath it. Before putting the bottom piece on, place the face on the front of the hood and trim it to the desired length so that it fits snugly in the hood. When closing the model just attach the legs and tail last so to get the model to stand properly. Besides that enjoy building!

Turbo Charge Boomerang Monkey

Model Details:

Pages: 2

Height: 2.76 in / 7 cm

Width: 2.29 in / 5.8 cm

Depth: 2.03 in / 5.2 cm

Download: 3D Model /Templates

Notes:  The model is pretty straight forward to build. You will need to trim both ears and the eye piece to make the model look natural. Furthermore, there is a natural bend in the body in order to fit the left arm correctly in place. Again like the other boomerang model you do not have to attach the legs exactly like the PDO says. Close the model by attaching the legs in any way too allow the model to stand using the tail to make a tripod. Hopefully you enjoy building!