Chibi Fuecoco

 

Commentary:

WHEN the shiny is released remind me to add the pdf for the shiny versions and to flesh out the rest of this post.

Regarding my opinion on this Pokemon, I like it. It is a fire dinosaur that have a hint of looking like an apple (I know we have flapple but the apple reference is not as prominent in this Pokemon). It does have a hint of Gible in it, making this model a little easier to make, I am actually excited to see what this Pokemon final evolution will be. The only thing I don't understand about Fuecoco is why did GameFreak slap a piece of American cheese on Fuecoco's belly. Did it just go to America and took as a souvenir and didn't know were to put it? I don't know but this starter Pokemon looks pretty cool and pretty promising for a pretty cool final evolution

Pokedex Entry:

🤷‍♂️

Fun Facts:

1. This Pokemon is a fiery Crocodile ( I don't care its a dinosaur in my eyes)

Model Details:

Pages: 1

Height:  2.40 in / 6.10 cm

Width: 2.11 in /  5.36 cm

Depth: 2.12 in / 5.38 cm

Download: 3D Model / Templates

Notes: This model is not too difficult to build. I will mention that you will build the model from the top down, but you will NOT start with the top top piece of the model (the piece with no tabs). The top top piece will be used to close the model so you can apply pressure from inside the model when building the legs. If you any other concerns when making the model, refer to the video down below. Besides that, I hope you enjoy building and stay tuned!

Chibi Reshiram

 

Commentary:

Cool looking Pokemon, but I never used this Pokemon so that is the end of this section.

Zekrom

Black Kyurem

Kyurem

White Kyurem

Pokedex Entry:

According to the pokedex, Reshiram can create flames from its tail and has the ability to scorch the world with fire and change the world's weather. Like Zekrom, Reshiram likes to help humans, but only those who want to build a world of truth. The savage part of tis Pokemon is that if people ignore truth and become to greedy, Reshiram will burn down their kingdoms😅🔥.

Fun Fact:

1. Reshiram has the same stat total as Dialga, Palkia and Giratina as well as Zekrom

2. Reshiram resembles a Wyvern and a hint of birds, pterosaurs and canines.

Model Details:

Pages: 2

Height: 3.70 in / 9.40 cm

Width: 4.47 in / 11.35 cm

Depth: 4.93 in / 12.52 cm 

Download: 3D Model / Templates

Notes: The only difficult part of this model is building the head. I would highly recommend using Pepakura Viewer to see where everything is attached or watch the video down below for some help. If you are building this model without lines, I would recommend that you fold the areas in which there is suppose to be lined. For the neck rings I decided not to build them but they are in the templates if you want to build them yourself. Lastly, to get the model to stand by itself, I recommend playing with teh angle of the tail. Besides that, I hope you enjoy building and stay tuned!

Chibi Incineroar

 

Commentary:

The two experiences I have of this Pokemon is when playing against Incineroar in Smash Ultimate and in Showdown. From Smash, I just remember getting beat by my friend who constantly use this Pokemon as I am terrible at Smash. Constantly getting thrown against the ropes and then getting killed by it spiking me with its fiery move. (I believe that it is Incineroar's attack I don't know the name of the attack as I haven't played Smash in awhile). For Showdown, I think I remember always getting a choiced band Incineroar while playing randoms. The only thing I remember is spamming Darkest Lariant and knocking out a few Pokemon. That is all about it.  

Litten

Torracat

Pokedex Entry:

According to the Pokedex, Incineroar has a violent and selfish deposition when battling and if it is not in the mood of listening to its trainer, it will ignore its trainers command. When battling opponents, it hurls ferociously punches at its opponents and finishes off its opponent by spewing fire up to 3,600 degree Fahrenheit (1982 degrees Celsius) from its navel. Despite is vicious side, Incineroar enjoys helping out smaller Pokemon... aw how cute.

Fun Facts:

1. Incineroar is the only starter Pokemon to have a lower based stat than its pre-evolution. Incineroar's base speed stat is 30 points lower than Torracat and 10 points lower than Litten

2. Incineroar is a combination of a tiger and a wrestler.

 

Model Details:

Pages: 2

Height: 2.80 in

Width: 2.78 in

Depth: 2.66 in

Download: 3D Model / Templates

Notes: Down below, I have included a video of me making the model. If you need help making the model, refer to the video. Besides that, I hope you enjoy building and stay tuned!

Chibi Torracat

 

Commentary:

Why is this not Dark type? I always thought that the second stage of Pokemon gain the second typing, but nope not for this Pokemon. 

Pokedex Entry:

Dang, I thought this section would be easy because this is a Generation 8 Pokemon, but nope it has four different entries. Well here is the summary of the entries. According to the Pokedex, Torracat has a bell of fire at its throat and it rings brightly whenever Torracat spits fire. Furthermore, when facing a powerful enemy, its firebell blazes hotter. Torracat also have powerful front legs that can bend an iron bar with one punch. Its trainer can also reconize when this Pokemon is sick because when the mane is standing on the end you can tell its in a good mood, but when it is not feeling well the fur will lie flat down. The final entry states that it can act spoiled when it becomes close to its trainer and has the ability to leave its trainer's body in scratches.

Fun Facts:

1. The release of its fire creates the sound of the bell

Model Details:

Pages: 1

Height: 2.30 in / 5.84 cm

Width: 2.06 in /  5.23 cm

Depth: 3.08 in / 7.82 cm

Download: 3D Model / Templates

Notes: This model is very similar to Litten it just has an extra spike on the face of the model. So if you need instructions you can go read those instruction. One thing I forgot to mention is for the tail you can just color the inside of the tail black instead of attach all the tabs to the non-tab section. This will save you a lot of time and something I recommend that you do. Besides that, I hope you enjoy building and stay tune!

Chibi Litten

 

Commentary:

It is a black cat that happens to spit fire. How else am I suppose to describe this Pokemon? It kinda of reminds me of the Deja Vu cat in the Matrix. Also, I really like the shiny version of this Pokemon as the black parts of the body turns pale white.

Pokedex Entry:

According to the Pokedex, in its downtime, Litten grooms itself and its fur gathers in its stomach and serves as fuel for its fiery moves. Furthermore, it is known that it takes awhile for a trainer to gain its trust. If one attempts to pet it prior to gaining its trust, it will result in nasty scratches. A cool entry that the Pokedex provides is that Litten's fur regrows twice a year. When the time comes, it sets itself on fire and burns the old coat. Pretty cool concept in my opinion as it is a nifty way for Litten to deal with the shedding of its fur.

Fun Facts:

1. Litten is based off of the tiger cat known as the mackeral tabbies

Model Details:

Pages: 1

Height: 2.00 in / 5.08 cm

Width: 1.74 in / 4.42 cm

Depth: 2.34 in / 5.94 cm

Download: 3D Model / Templates

Notes: This model is not too difficult to build. Build the head and the body separately and attach them together when completed. Make sure to place a weight in the body to get the model to stand by itself. Besides that, I hope you enjoy building and stay tune!

Chibi Primal Groudon

Commentary:

Pretty cool form to normal Groudon as it looks like it has lava in its design. Besides that, all I know is that Primal Groudon automatically has the ability Drought and was used quite heavily in competitive Pokemon. According to Smogon, Primal Groudon was considered in Ubers tier as it could run multiple different sets such stealth rocks and swords dance, a complete defensive support Pokemon with toxic and stealth rocks, mixed attacker with rock polish, mixed attacker with swords dance, and a double dance set that runs rock polish and swords dance. Yeah Groudon could play multiple different roles succesfully based on whatever role you wanted it to be. Makes sense why it is in Ubers.

Fun Facts:

Primal Groudon is said to create land with every step it takes.

Pokedex Entry:

According to the Pokedex, through Primal Reversion, Groudon can cause magma to erupt and expand the landmass of the world. Just typical Groudon stuff you typically would expect from it

Model Details:

Pages: 2

Height: 3.70 in / 9.40 cm 

Width: 2.47 in / 6.27 cm

Depth: 5.09 in / 12.93 cm

Download: 3D Model / Templates

Notes: Down below I have included a video of me making the model. If you want to build it yourself, you can download the templates and follow along at 0.25x speed. This model's structure is basically idetical to the normal Groudon model so if you were able to successfully make that model you should be able to successfully make this one. Besides that I hope you enjoy building and stay tuned!

Chibi Mega Charizard Y

Commentary: 

Mega Charizard Y seems the natural/ more fitting Mega evolution than Mega Charizard Y. The color palette stays the same and the general Charizard build just gets an update. I do not know much about how Mega Charizard Y did in VGC, but I believed that it was much better than Mega Charizard X because of its ability drought eventhough it takes 50% from stealth rocks 😅. Looking at Smogon, it ran flamethrower, focus miss, solarbeam, and defog. I do not know if this set was good, but it was the only one on Smogon.

Mega Blastoise     Mega Charizard X     Mega Venusaur

Pokedex Entry:

According to the Pokedex, Mega Charizard Y boasts speed and maneuverability greater than those of a jet fighter. Uh okay? 

Model Details:

Pages: 3

Height: 2.95 in / 7.49 cm

Width: 3.85 in / 9.78 cm

Depth: 5.13 in / 13.03 cm

Notes:  This model is similar to Mega Charizard X's build. Down below I have included a video of me building the model, so if you have any questions refer to the video.

Download: 3D Model / Templates

Chibi Blaziken

Commentary:

Speed Boost Blaziken. I have swept many people on showdown with this Pokemon. Interesting fact, Blaziken practices Martial Arts. Did not think that forms like these would exist in the Pokemon Universe, but hey they do.

Pokedex Entry:

According to the Pokedex, Blaziken flames comes out of with its wrist and its fiery punches scorches its foes. Okay make sense. What I did not expect as that Blaziken had the ability to jump over 30 story buildings. HUH?! Blaziken does not look like it has the capability to do that, but hey it is a fantasy game so I guess anything is possible.

Model Details:

Pages: 1

Heights: 2.80 in / 7.11 cm

Width: 1.94 in / 4.93 cm

Depth: 1.95 in / 4.95 cm

Notes: Build the the head, torso and leg section separately. Then glue them all together. Lastly, you the two cones and attach them (one on each leg) to get the model to stand by itself. Watch the video if you have any problems building the model. Besides that, I hope you enjoy building and stay tune!

Download: 3D Model / Templates

 

Chibi Moltres

Commentary:

Out of all the birds, in my opinion, this one is the worst. When I first played through Pokemon FireRed I caught all the birds thinking this would make the elite four easier to complete. I had planned to use Moltres for some of Lorelei's and Bruno's Pokemon as I could use the super effective moves Fire Blast (yes, as a kid it was all about damage) to knock out some of Lorelei's ice types and fly to knock out Bruno's fighting types. It took me many tries to defeat the elite four. And none of the previous ideas mentioned above worked. Moltres never lived more than two turns against either the Lorelei, Dewgong, Cloyster, or Lapras as they all used some water move, each Pokemon had, and its Fire Blast never was able to take any of these Pokemon in one-shot. Bruno's Hitmonchan and Hitmonlee were easily one shotted by Moltres's Fly, but Machamp was bulky enough to take two flys and thus able to kill Moltres with either rockslide or cross chop (I do not remember). So yeah, in my opinion Moltres was quite useless when I used it. All the other members on the team played a large role in beating elite four for the first time, but that is a story for another day. 

 

Go check out http://www.pokemonpapercraft.net/2021/07/moltres.html if you want a challenge and want to build the more detailed model:

Pokedex Entry:

According to the pokedex, with every flap of its wings, Moltres creates a dazzling flare of flames that turns the night sky red. Furthermore, the appearance of Moltres represents the coming of spring. Alrighty these two makes sense a legendary Pokemon that signals the change in season as well as having a mystical characteristic. This next entry states that if it gets injured, it dips its body in molten rock to heal itself. This explains why Moltres is where it is when you capture it in Pokemon FireRed. I'm just going to assume magic on how it can heal Moltres because how does lava have the ability to heal a flying bird? I could understand if this were Regirock or something like that.  

Model Details:

Pages: 1

Height: 3.30 in / 8.38 cm

Width: 3.35 in / 8.51 cm

Depth: 4.89 in / 12.42 cm

Notes: This model is not too difficult to build. Build the head and body separately and them to each other when they are both done. Use the flame on its tail to create a tripod with the legs to get the model to stand by itself. Besides that, I hope you enjoy building and stay tuned!

Download: 3D Model / Templates

Chibi Entei

Commentary:

So…  in one of the early Pokemon movies (the one with all the unknowns), wasn't Entei orginally a human that got changed into the legendary Pokemon. I mean if so, doesn't that flat out reject the legend that Ho-oh revived three Pokemon (I like the theory of those Pokemon being Jolteon, Flareon, and Vaporeon). I don't know I usally just type whatever comes to my head regarding this Pokemon. I do remember this being a pain to catch it in Soulsilver when it was a roamming legendary. I remember thinking I could just put them to sleep, and they would not run from the battle, but no they still can run when they are asleep. It must be sleep walking or has some instinct to. Despite playing FireRed, I did not know I could encounter Entei in the game and never bothered trying. Also, I do have that shiny Entei Pokemon released close to a decade ago.  

Pokedex Entry:

Alright Entei's Pokedex entries are quite consistent throughout the games. Entei is said to embody the passion of magma and a new one is said to be born every time an eruption happens. Furthermore, it is rumored every time an Entei barks, a volcano erupts somewhere around the globe. So theoretically, you could create an army of Enteis by training an Entei to bark on command and then have a team determine where the new Entei was born and rinse and repeat until you have any army of a legendary Pokemon. I do have to admit these entries do takeout the mystical essence of Entei as I thought that it was a Ho-oH who revived a burning Pokemon in the burning tower thus creating the ONE and only Entei. 

Model Details: 

Pages: 2

Height: 2.90 in / 7.37 cm

Width: 2.41 in / 6.12 cm

Depth: 3.66 in / 9.30 cm

Download: 3D Model / Templates

Notes: The only difficult part of the model is building the face. First build the head but do not close the head. Then attach the grey mouth to the red eyes and finally glue the yellow part like the picture below, but make sure to glue the yellow part on top of the grey part. Close the HEAD with the piece shown below. Regarding the body, just make sure to put a small weight like a penny or an eraser cap to allow the model to stand up by itself. Besides that, I hope you enjoy building and stay tune! 

Place the grey piece inbetween the head and the yellow piece

Leave this part open until you finish building the entire head

Chibi Quilava

Commentary:

I do remember running through Soulsilver with a Quilava before. I just remember being completely surprised when it evolved at level 14 right after I defeated Faulkner. I was then pissed off that it took until level 36 to evolve it to a Typholsion because by that time in the game Quilava was falling behind the rest of my team. I feel like starters should evolve at 16 and then again at 32 or 34. It just feels more natural to me. Fun fact, Quilava was the first papercraft I made without lines. Why do I remember this? Well because I remember sitting in front of the computer to find make sure to fold every line (which is not necessary). 

                           Typhlosion               Cyndaquil

Pokedex Entry:

According to the Pokedex, Quilava is a highly nimble Pokemon that can dodge attacks while scorching its opponents. Furthermore, Quilava likes intimidating its foes by turning its back and demonstrating how ferociously its fire blazes and the heat of its flame; the stronger the flame the more ready it is to fight. When I first read about this, all I could think of is a group Quilava performing this intimidation factor like the New Zealand Rugby team's Haka prior to a match. If you have not seen this, go on YouTube and search it. The other entry is somewhat weird. According to Pokemon Silver and Pokemon FireRed, Quilava can withstand any kind of fire attack. UhhhhhhhI don't think so. I do not believe a low level Quilava will be surviving an eruption from a full health Primal Groudon in the sun. There are probably more crazy examples than the one I provided, but I cannot think of any off the top of my head. 

Model Detail:

Pages: 1

Height: 2.05 in / 5.21 cm

Width: 1.22 in / 3.10 cm

Depth: 2.46 in / 6.25 cm

Notes: This model is simple to build. When making the flames, you can just fold the white sides on top of each other causing only the color to be shown and then trim the excess white parts off. Make sure to put a small weight inside the body so the model can stand by itself. Besides that, I hope you enjoy building and stay tune! 

Download: 3D Model / Templates

Chibi Charizard

Commentary:

Before I begin, go check out Guillermomate who help me make this model. I used this Pokemon once in a run-through. You can read the Charmeleon commentary to figure out why. I used this Pokemon in Soulsilver. I had not used one before and I wanted to see if Charizard, in my opinion, was any good. After defeating Johto, I headed to Kanto and took the Charmander Professor Oak offered me. I immediately gave it the exp. share and grinded it up to the same level as all my other Pokemon in my party and went to battle Lt. Surge. Yeah there was a glaring hole in my team. I had Feraligatr and Charizard😅. I do not exactly remember the rest of the team, but I got destroyed Lt. Surge many times. I think the only reason why I beat Lt. Surge was RNG, but yeah... Charizard's first impression wasn't the greatest. I mean after that hiccup, Charizard was alright for the rest of the run.

Charmander

Charmeleon

Pokedex Entry:

According to the Pokedex entries, Charizard's fiery breath can reach extremely high temperatures that it can melt glaciers weighing up to 10,000 tons. I have no idea how hot that has to be🔥, but I assume that it is really hot. Another entry states that when it is furious the flame on its tip turns bluish white. I guess that the Charizardite X just makes Charizard extremely furious to get it to breath blue fire🤪. Besides that the other Pokedex entries states basic facts about Charizard like Charizard can fly at an altitude at of 4600 feet, can accidently cause forest fire (oooookay😅), never turns its fiery breath against a weaker opponent (aw cute🥰), and its flame burns hotter when experiencing harsh battles.

Model Details:

Pages: 2

Height: 3.00 in / 7.62 cm

Width: 3.45 in / 8.76 cm

Depth: 3.19 in / 8.10 cm

Notes: This model is quite straightforward. Build the head and body separately. Make sure to attach the horns and wings prior to closing their respective locations. After building the head and body glue them together. The model can stand by itself. Besides that, I hope you enjoy building and stay tuned😁!

Download: 3D Model / Templates

Chibi Charmeleon

Commentary:

Even after evolving my Charmander to Charmeleon, I still could not defeat Brock. During my first run through FireRed, I chose Charmander as my starter. No matter what I tried, as a seven year old kid, I did not seem to beat Brock. After failing multiple times against Brock, I finally decided just to grind my Charmander to Charmeleon. I thought I could beat Brock with Charmeleon as it had a super effective move of metal claw, but I continued to fail. I eventually just gave up and restarted my game and chose bulbasaur as my starter. Yeah not the greatest experience with this Pokemon, but that was my brief spell of using a Charmeleon in a Pokemon game.

Pokedex Entry:

According to the pokedex, Charmeleon, is hot-head and excited by nature and only calms down after the battle. It attacks with its sharp claws and when it swings its tail it can raise the temperature to unbearable levels. The entry that is kinda of interesting is when it is excited in battle, it can blow bluish white flames. This was all the way back in the original yellow version. Somewhat explains why Charizard can turn into Mega Charizard X.

Model Details:

Pages: 1

Height: 2.58 in / 6.55 cm

Width: 1.53 in / 3.89 cm

Depth: 2.35 in / 5.97 cm

Notes: This model is not too difficult to build. Just build the head and body separately and them glue them together. The model will stand by itself, so do NOT worry about finding a way to get the model to stand. Besides that, I hope you enjoy building and stay tuned😄!

Download: 3D Model / Templates

Chibi Numel

 

Commentary: 

Out of 800 other Pokemon I made this one. Yeah I think this was one of my older models when no one visited my site and I just used random Pokemon generator to decided what I would make. I know I am a genius at deciding on what I should be making🤪. I never used this Pokemon in any run. I always thought whenever an NPC had this Pokemon to switch to a water type and just surf it and about 101% of the time it would get one-shotted. All I have to say is that Numel's expression is mine at the moment. It is the end of the semester and I really do not want to do anymore work, yet I still have finals and another set of exams to go through. So just like me Numel, I look quite drowsy and possibly a tad bit annoyed.

Pokedex Entry:

Surprising all of Numel's entries are consistent. In all the games, it states that Numel stores magma of almost 2,200 Fahrenheit in its body. If it is splashed by water the magma cools and hardens. Ah so Numel is just a volcano on legs🌋. Cool.... or in this case hot😅.

Model Details:

Pages: 1

Height: 2.10 in / 5.33 cm

Width: 1.40 in / 3.56 cm

Depth: 1.84 in / 4.67 cm

Download: 3D Model / Templates

Notes: If you are new to papercrafts this model is easy and simple to build. One thing. You can cut the neck to create a plane for the head to sit on and to shorten the neck a tad. Besides that I hope you enjoy building and stay tuned!

Chibi Zen Galarian Darmanitan

 

Commentary:

Well, before I start telling a story about this Pokemon, I would like you to know this the first Pokemon in which I had to build from scratch. I am working on it so I make Pokemon without a chibi model at the moment so that is in store at the moment. Okay on to the story. When googling for a picture for Galarian Darmanitan, I saw this model and was like this has to be fan art. In my opinion, this did not look like a Pokemon. To me it looked like some sort of special version of King Boo or a make shift snowman made by kids (Where the carrot for the nose caught fire, the kids could not reach the top of snowman so they made the face on the bottom snow part and oven-mitts were used for arms). After doing more research I learned this actually was the Zen version I was like....okay.... and built it. I still cannot believe this is a Pokemon, but hey I am not Nintendo.

Recently I help Paperpokes make a more detailed version of this Pokemon. You can find the templates at http://www.pokemonpapercraft.net/2021/04/galariandarmanitanzen.html

Pokedex Entry:

Holy crap, this Pokemon is me whenever I lose my brain completing an assignment. According to the Pokedex, when this Pokemon becomes angry, it spews fire and rampages discriminately. One, this is completely the opposites of its regular form because it is calm in its Zen form. And two this Pokemon is like me because when I start taking 3-4 hours on one or two problems, I start yelling at the top of my lungs just wanting to be done with my work. I do not care what my roommates think about my outrage and I usually get made fun of afterward or told to calm down which makes the situation even more worse.

Model Details:

Pages: 1

Height: 2.30 in / 5.84 cm

Width: 1.40 in / 3.56 cm

Depth: 1.86 in / 4.72 cm

Download: 3D Model / Templates

Notes: This model is very easy to build and if you are new to papercrafting this is an excellent model to start off with. Build each individual section separately then attach each section. Make sure to put a small weight like a coin or eraser in the base sphere to allow the model to stand up by itself. I hope you enjoy building and stay tune!

Chibi Mega Charizard X

 

Commentary:

I have somehow posted 100🥳 times. So I think I will release a pretty popular Pokémon and I have INCLUDED a time lapse at the bottom of this post if you are new you can follow along and build with me. I have to admit I am not a big fan of the Pokémon company constantly giving Charizard new form, but I have to admit this is the one exception to this. I understand this Pokémon is mainly fan service but I just love this mega evolution. A black dragon Pokémon with blue fire with a decent shiny color palette I cannot really hate this Pokémon. I never used this besides in showdown and watching other Youtubers in their own little league, but I like how mega Charizard X is has a tad bit of physical bulk and can be a fast physical sweeper after setting up a dragon dance. I think you people get the point. Mega Charizard X is a pretty cool Pokémon with a cool sprite and decent stats. I give Nintendo a 10/10 for this Pokémon.

Pokedex Entry:

Dang it, I cannot really make fun of Mega Charizard X's pokedex entry. It just says that its overwhelming power turns it black and it creates blue flames. I mean I can say it must be better than Charizard Y because Charizard Y does not change color and thus not as powerful but that is all I can think of.😕

Model Details:

Pages: 2

Height: 2.40 in / 6.1 cm

Width: 3.99 in / 10.13 cm

Depth: 5.24 in / 13.31 cm

Download: 3D Model / Templates

Notes:  Down below I have included the YouTube video for the timelapse of me building this model. I do not know how many of these I will make, I will see how popular this first one is. A few things to note when watching the time-lapse. First off, I like building multiple sections of the model at the same time so pay close attention on what piece I am working on. Second, I kind of went off screen when building the first wing, but you should know I have included me building the second wing, so if you can build the second wing its exactly the same as building the first. Lastly, I did eat all of those M&Ms. Besides that I hope you enjoy building this model and stay tune for more! 

Chibi Darmanitan

 

Commentary:

Pretty cool Pokemon. Its a fire monkey. That is about it. I never used it in game before I only remember Shofu running a choice band on Darmanitan and K.O.ing a lot of Pokemon with Flare Blitz while saying "body bag" back in Gen 6. Yeah not the one of my greatest of posts but I do not have any funny or interesting opinions about Darmanitans.

Recently I help build the more detailed and bigger version of Darmanitan. You can find the templates for the model at .http://www.pokemonpapercraft.net/2021/04/darmanitan.html

Pokedex Entry:

These Pokemon entries make sense. According to Pokedex, Darmanitan has an internal fire that burns at 2500 degrees Fahrenheit, 1371 degrees Celsius, which it uses to power its punches allowing it to obliterate trucks. Okay this part makes sense, Darmanitan creates energy and expels it through its strong punch. My question is how did scientists (or who ever enters the data for the Pokedex) measure the internal temperature inside of Darmanitan. Did they just went "say ah" and used a thermometer to measure the temperature?😂 I assume they probably used some chemicals and science to determine it when a Darmanitan died, but it is kinda of funny to imagine a Darmanitan at a doctors off getting its internal temperature getting checked out.

Model Details:

Pages: 1

Height: 2.40 in / 6.10 cm

Widht: 2.47 in / 6.27 cm

Depth: 2.82 in / 7.16 cm

Download: 3D Model / Templates

Notes: This model is not too difficult to build. First build the main body of Darmanitan closing at the tail. Before closing the model, attach the eyebrows. After closing the model, play with the location of the legs to allow the model to stand up properly. Besides that I hope you enjoy building and stay tuned!

Chibi Zen Darmanitan

Commentary: 

I did not even know this Pokemon existed when I first play Pokemon Black. I just remember jamming the "A" Button in the desert area of the game and accidently hitting the D-pad putting me right in front of the statues. I was immediately into a battle and I was like... huh what is this Pokemon. It said it was Darmanitan and I was like "No that is not a Darmanitan. Darmanitan is red not blue" I still caught it and never used it after that. Yeah... that is pretty anti climatic. It just did not look as cool as the normal one, so I did not bother using it. I literally do not know anything about this Pokemon besides that story. Like what type is this Pokemon and how do I use this?

Recently I worked with Paperpokes to make a bigger and more detailed version of this Pokemon. You can find the templates at http://www.pokemonpapercraft.net/2021/04/darmanitanzen.html

Pokedex Entry:

According to the Pokedex, through meditation Darmanitan hones its psychic power. So huge hypothetical. Darmanitan has huge anger problems and through mediation calms down and turns into a psychic power. Besides that, the only other entry says when it gets injured it turns into stone to sharpen its mind and body. So it goes to sleep to recover from an injury. Sounds something that a humans do it recover.

 

Model Details:

Pages: 2

Height: 2.29 in / 5.82 cm

Width: 2.40 in / 6.10 cm

Depth: 2.72 in / 6.91 cm

Download: 3D Model /Templates

Notes: This model is very simple to build. If you are new to the hobby I recommend building this model. In general, you start with the top piece and attach the pieces going down close the model with the piece with tabs on it. Besides that, I hope you enjoy building and stay tuned!

Chibi Typhlosion

Commentary:

Back when Pokemon Platinum was the newest game released by Nintendo, I wanted to complete the Pokedex as much as possible. I played through FireRed and Emerald and was able to fill out a good amount of the dex besides the mythical legendary Pokemon, only available through special events. This was before Heartgold and Soulsilver was release and I had no access to gaining the Johto starters and I really wanted a Typhlosion. I know that you can get the starters in Emerald after completing the Pokedex in that game, but let's be honest that is near impossible to do. I even went as far for asking my friend who had an Action Replay to find a cheat to get a Typhlosion. He never found one and I had to wait until Heartgold and Soulsilver was released to use Typhlosion and I think you can figure the starter I picked for my first run. Also, I wanted to shiny hunt all the Johto starter so I actually have a shiny Typhlosion which is pretty cool.

Pokedex Entry:

I think two out of three entries explains a wild Typhlosions behavior. It attacks its opponent or prey by using blasts of flames or rubbing its fur together to create a huge explosion. Typhlosion also creates heat shimmers that can hide itself. The odd entry is that when Typhlosion's "rage peaks," anything that touches will instantly go up in flames. Like what Will Smith has said, "That's Hot! That's Hot!" So, if Thermite, the highest burning material in the world, were to touch Typhlosion during its rage, would it instantly go up in flames. If so Typhlosion would have to be 2,200 Celsius, which is kinda of hot. 

Model Detail:

Pages: 1

Height: 1.76 in / 4.47 cm

Width: 2.00 in / 5.08 cm

Depth: 3.06 in / 7.77 cm

Download: 3D Model /Templates

Notes: This model is not too difficult to build. Just make sure to place a weight in the body to allow the model to stand and to close the model with the top piece after the spikes are attached to the bottom part of the body. Besides that, I hope you enjoy building and stay tuned!

Chibi Ninetales

Commentary: 

I have never used this Pokémon like ever. I was trying to think if I have ever used this Pokémon in any Pokémon series game and I kept drawing a blank. The main reason I probably have not used this Pokémon is because I owned FireRed. Ninetales was a game exclusive to LeafGreen, so I never had a chance to use this Pokemon. I probably replayed FireRed the most out of all the Pokemon games, so I never really built a connection with Ninetales and thus never used in the future🤷‍♂️. I mean, in my Platinum game, I have a Ninetales when I attempted to complete the Pokedex, but I never used it. It is just chilling in the box doing cat things. I do have to admit I like the Alolan version of this Pokemon better than its normal form. 

Pokedex Entry:

According to the Pokedex, Ninetales was a creation from a merging of nine saints or nine wizards or nine noble saints, it depends on the game you read the entry from. This explains the number of tails it has and the naming of the Pokémon (Imagine the conversation people naming this Pokémon went. hmmm what should we name this Pokémon? Well, it has nine tales maybe we should just call it that. Well, we have 150 more Pokémon to name so I guess it works). Besides the explanation for the amount tails this Pokémon has, the Pokedex also states that this Pokémon is very smart and can live for 1000 years. Furthermore, this Pokémon is extremely vengeful. According to the early Pokedex entries, it is stated that if you pull a tail from Ninetales it will lay a 1000-year curse on you. Okay makes sense it is highly senstitve and does want to be touched. The problem I have is that a later Pokedex entry states that if you cross this Pokémon it will lay a 1000-year curse. So, what classes as crossing this Pokémon because I feel like that would depend on each Ninetales and the smallest thing could land you a 1000 year curse? Also, what is 1000 year curse? (I will let you use your imagination) Sheesh after these Pokedex entries no wonder why I never used this Pokémon. 

Model Details:

Pages: 2

Height: 2.40 in / 6.10 cm

Width: 1.70 in / 4.32 cm

Depth: 3.87 in / 9.83 cm

Download:  3D Model /Templates

Notes: The model is not too tough. The only hard part is the tail. When making the tail, start with the piece with two tabs and build the pyramid (tail pieces). Then close the tail with the piece with no tabs. The tuff on the head of the model is not difficult to build, but I recommend building the piece on the top right first and then attach the piece underneath it and then close the tuff with the piece that has two tabs Besides that I hope you enjoy building and stay tuned!