5-x-x Ultra Juggernaut

 

Commentary:
I have personally never used this upgrade but I like the idea of a monkey using a catapult to pop bloons. I know the 4-0 was alright in the early game in BTD5 and it was a cheap option to pop ceramic bloons and shoot down straight away in BTD Battles, but I personally don't know how usable this monkey is nowadays. The only problem with monkey is that I wish that the design of this monkey changed when upgrading from the fourth-tier. It seems that the only change that occurred was the catapult got bigger. Besides that, I have nothing else to say about this monkey.

Entry:
The ultra juggernaut does a lot of damage to ceramics as it breaks them down into 4 black bloons and 4 white bloons. Unlike its fourth-tier upgrade,
if half of the pierce of a projectile is used the projectile will split into 6 normal juggernaut balls and if all of its 200 pierce is used up, the 
projectile will split into 12 balls

	Easy: 12,750
	Medium: 15,000
	Hard: 16,200
	Impoppable: 18,000

Fun Facts:
1. This upgrade requires the least amount of exp to unlock (22,000)
2. This is one of two tier 5 upgrades where the monkey does not wear no clothes
3. This is the only Tier 5 upgrade that does not change from its regular one.

Model Details:

Pages: 5

Height: 6.00 in / 15.24 cm

Width: 4.19 in /  10.64 cm

Depth: 5.71 in / 14.50 cm

Downloads: 3D Model / Templates

Notes: Make the catapult is not too difficult. Make all the individual pieces and glue them together. MAKE SURE to place two small weights in the two bases of the catapult to allow the model to stand by itself. The monkey is just like any other monkey on this website but... make sure that each tab is fully glue to its respected piece before gluing the next one. Why? the legs are crossed so the pieces are a little different. I know very descriptive. If you need help view the video above to help you out. Besides that, I hope you enjoy building and stay tuned.

Basic Glue Gunner

 

Commentary:

This monkey slows down balloons, that is all it does. Later upgrades make this tower pretty useful as it can actually do damage and slow M.O.A.B class balloons, but until then this monkey is pretty useless. Personally, this tower is not my cup and tea and you will only catch me using the 0-2-1 Glue Gunner in the early game. Besides that I stay far away from this tower.

Entry:

It shoots slobs of gluing slowing down the balloons to 50%. So it basically slows down balloons and that is about it.

Model Details:

Pages: 2 or 4

Height: 2.89 in / 7.34 cm   or  5.00 in / 12.70 cm

Width: 1.54 in /  3.91 cm   or  2.67 in / 6.78 cm

Depth: 2.44 in / 6.20 cm    or  4.22 in / 10.72 cm

Download: 3D Model / Templates

Notes: For this model I have included different sizes. The bigger size is the easier the model is to build of the two. If you have built any of my Bloons Tower Defense models before, it is very similar to how to build those. If you have not, here the basic instructions. First build the head. For this model in specific you will need to trim the ears so they are not as large, and I have provided the option to make the eyebrows 2D or 3D. Use the PDO to help build the arms and attach it to the body when you get there. Finish building the body, but DO NOT glue the legs yet. Next build the hose and glue bucket and attach it to the body. Sorry but there was no connect piece between the hose and the bucket so...yeah. Next build the legs and tail. When building the legs, you can free hand glue the feet to the leg. As long as the the leg is in the general region of the feet it is fine. Lastly, to get the model to stand free hand glue the tail and legs (to the general area where they are suppose to be glued to but do not have to be glue directly to the tabs assigned to) to a location in which the model can stand by itself. An viola the model is done. Besides that, I hope you enjoy buiding and stay tuned!

Wizard Monkey

 

Commentary:

I use to think this monkey was the perfect starting tower for every map. I mean by upgrading this monkey you can hit every type of balloon. Unfortunately, I eventually learned how inefficient this monkey was a starting because it had a slow shooting time, was expensive and terrible against regen balloons. This tower and its later upgrades seem to be better in the late game, but not in the early game with its many small flaws.

Model details:

Pages:1

Height: 2.91 in / 7.39 cm 

Width: 1.72 in / 4.37 cm

Depth: 1.62 in / 4.11 cm

Download: 3D Model / Templates

Notes: The model is quite straightforward to build, I would recommending gluing a circular piece on the inside of the gown in order to have something to glue the feet to. Also, to get the model to stand by itself, make a tripod with the legs and tail. Besides that, enjoy building and stay tuned.

Basic Ninja Monkey

Commentary: 

I realized I had posted Pokemon papercrafts for close to two months straight without posting a different genre. Nothing wrong with that I have a lot in store for Pokemon papercrafts this month... so make sure to stay tuned. But anyways... back to the normal content. The ninja monkey is by far my favorite monkey in bloons tower defense. If you upgrade this monkey properly it can pop any bloons. You need an early game monkey, buy a ninja monkey. You need a late game monkey, buy a ninja monkey. You need camo lead popping power, upgrade your ninja monkey. You need MOAB popping power, upgrade your ninja monkey. You need to distract bloons, upgrade your ninja monkey. You need camo popping power do not even worry you do not even have to upgrade your ninja monkey. You get the point the ninja monkey is the swiss army knife for monkeys in Bloons Tower Defense and that is why it is my favorite monkey.

Model Details: 

Pages: 1

Height: 2.73 in / 6.93 cm

Width: 1.89 in / 4.80 cm
Depth: 2.35 in / 5.97 cm

Download: 3D Model / Templates

Notes: The model is just like any other Bloons Tower Defense monkey here. The specific advice I would give would be to trim the eyes to get them to fit into the eyes slot. Also, when building the shuriken, I just cut the templates in order to cut out the middle circle. I then just put one side of the shuriken on top of the other one and did not use the tabs to connect both sides. I cut the tabs off all together. Besides that, I hope you enjoy building, if you have questions leave them in the comments below, and stay tune for more content this month! 

Dart Monkey

Commentary: 

This is the first monkey you unlock when you first start playing the game. Even though the first few upgrades are pretty poor, once you upgrade this tower to the 3rd, 4th and 5th tier this tower becomes a beast. I like how the first tower unlocked by the player is actually decent throughout the game and does not just fade into the background and become unusable on different levels. 

Model Details:

Pages: 2

Height: 2.75 in / 6.99 cm

Width: 2.17 in / 5.51 cm

Depth:  1.97 in / 5 cm

Download: 3D Model / Templates

Notes: The model is pretty straightforward to build. So when making this model, I forgot to unfold the dart for the monkey at the same time I unfolded the monkey so it is a separate file from the monkey. Also, when making the dart I just cut out a v-shape on a piece of paper and attached it to the dart instead of building the piece in which is suppose to be the tail for the dart. For this model, I folded the tabs in for the legs and free hand glued them to the body in a fashion to get the model to stand (putting them in a way to cause the model to lean backward naturally). Then I glued the tail on to create a tripod with the legs to allow the model to stand. Besides that, enjoy building!

Boomerang Monkey (x-x,-x)

Model Details:

Pages: 2

Height: 2.78 in / 7.06 cm

Width: 1.90 in/ 4.83 cm

Depth: 2.36 in / 5.99 cm

Download: 3D Model / Templates

Notes: The model is somewhat difficult to build. Follow the PDO to help build the body and arms. I decided to make the red V on the head 2D but if the files have the V has a 3D parts so you can decide how you want to make it. Also, I trimmed the ears so they are not so large. Furthermore, advice for closing the model, attach the legs last and fiddle with their positioning to get the model to stand (the tabs do not have to completely match up to make the model look nice). Use the tail to make a tripod to help make the model stand up. Besides that Enjoy building!