Burned Tower

Commentary: 

For those who actually pay attention to the model numbers I forgot 130. If you look at it chronologically this will make no sense, but I have to fix my mistake somehow. Anyways, this section is going to be really bare. Cool fact is that the burned tower use to be the home for Lugia before it was destroyed.

Ho-oh     Lugia     Entei     Raikou     Suicune

Model Details:

Pages: 18

Height: 7 in / 17.78 cm

Width: 11.21 in / 28.47 cm

Depth: 9.37 in / 23.80 cm

Notes: This model is not too difficult to build, it is just big. First, build the structural walls and then build the roof. Once the walls are attached to one another and the roof is built, attach the walls to the roof. Next, build all the miscellaneous wood planks and attach them in the general spot they are suppose to be. Lastly, build and attach the grey platform. Besides that, I hope you enjoy building and stay tuned! 

Download: 3D Model / Templates

Chibi Feraligatr

Commentary:

I'm surprised that Feraligtr evolves so early at level 30. I remember I was climbing the light house to get to the Ampharados in Soulsilver and after a battle Croconaw began evolving. I was completely surprised as I knew that Typhlosion evolved, so I thought the game was making a mistake, but no Croconaw evolved at level 30. I do have to admit, out of the Johto starters, Feraligtr, in my opinion, is the best as it gets great type cover in game as it can naturally learn crunch, ice fang, superpower and aqua tail, and has a cool shiny to go along with it. Side note, one of my first run-throughs of Soulsilver, it somehow managed to survive Lt. Surge's Raichu thunderbolt on six hp while being five levels lower than Raichu. Don't know how but it did. 

Pokedex Entry:

Well, Feraligtr has some intimidating Pokedex entries. According to the pokedex, to intimidate its foes by opening its mouth, followed by kicking its POWERFUL hind legs to charge at an incredible speed. Furthermore, when it bites its opponents with its massive jaw, it shakes its head and savagely tears its victim up. Alright quite an intimidating Pokemon. What I do not understand is that according to the original Pokemon Silver entry, Feraligtr has a problem supporting its own weight out of water and thus it must get down on all fours. Two things. One, unless I am mistaken, I have never seen a sprite of Feraligtr on all-fours as it normally stands on its two hind legs. Secondly, I thought that Feraligtr has powerful hind legs. I mean it is specifically stated in its entry. I guess not powerful enough to stand on then. 

Model Details:

Pages: 1

Height: 2.80 in / 7.11 cm

Width: 1.53 in / 3.89 cm

Depth: 3.04 in / 7.72 cm

Notes: This model is not too difficult to build. I have included a video of me building the model down below so go watch the video if you need help. One thing not to clear in the video is for the teeth, I just took scrap paper and cut triangles out of to make the teeth. I then glued the teeth in the general location in which they are supposed to be located at. The option is there to make the teeth 3D but making it 2D just saves more time. Also, put a weight in the model to allow the model to stand by itself. Besides that, I hope you enjoy building, subscribe, and stay tune! 

Download: 3D Model / Templates

Chibi Blaziken

Commentary:

Speed Boost Blaziken. I have swept many people on showdown with this Pokemon. Interesting fact, Blaziken practices Martial Arts. Did not think that forms like these would exist in the Pokemon Universe, but hey they do.

Pokedex Entry:

According to the Pokedex, Blaziken flames comes out of with its wrist and its fiery punches scorches its foes. Okay make sense. What I did not expect as that Blaziken had the ability to jump over 30 story buildings. HUH?! Blaziken does not look like it has the capability to do that, but hey it is a fantasy game so I guess anything is possible.

Model Details:

Pages: 1

Heights: 2.80 in / 7.11 cm

Width: 1.94 in / 4.93 cm

Depth: 1.95 in / 4.95 cm

Notes: Build the the head, torso and leg section separately. Then glue them all together. Lastly, you the two cones and attach them (one on each leg) to get the model to stand by itself. Watch the video if you have any problems building the model. Besides that, I hope you enjoy building and stay tune!

Download: 3D Model / Templates

 

3-x-x Berserker Brew Monkey

 

Commentary:

I know that is monkey makes other monkeys more powerful for a certain amount of time but that is it. I assume this is a support tower and you just put it in the middle of your more powerful monkey and let him do his things.  

Entry:

This version of the alchemist gives a special brew to nearby monkeys that temporarily provide extra damage, range, attack speed and pierce. The potion wears off after many attacks or the duration of the brew wheres off, whichever comes first. So, my question here is what is in this potion, but I assume it is like some sort of energy drink. 

Model Details:

Pages: 3 -- 7

Height: 2.90 in / 7.37 cm -- 4.50 in / 11.43 cm

Width: 2.28 in / 5.79 cm -- 3.55 in / 9.02 cm

Depth: 3.53 in / 8.97 cm -- 5.48 in / 13.92 cm

Notes: In the files I have included two sizes to build the model. The bigger model is easier to build compared to the smaller one. Furthermore, down below I have included the video of me building this model. I am going to let you know that is model is quite difficult to build and took me about 7 hours (over the span of two weeks) to build 2 hours to unfold and around another 2 hours to tidy up everything and make it presentable. It would be greatly appreciated if you like the video and subscribe. Also, when I am building, I like working on different sections at the same time so that when one is drying, I can work on another section, so if you are confused on exactly what I am working on just skip forward a little bit. Besides that, I hope you enjoy building and stay tune!  

Download: 3D Model / Templates

Chibi Raikou

 

                                              Entei             Suicune 

Burned tower coming soon.        

Commentary:

I have to admit Raikou is one of my favorite legendary Pokemon. In my opinion, it just looks super cool; A legendary black and yellow dog with a hint of purple and blue sign me up. I think based off this opening sentence you would think I would have used it while playing through Soulsilver or Heartgold at least once and have funny story to tell. But nope. I only used legendary Pokemon in my main team when Istarted playing Pokemon Diamond (I went back to play FireRed and Emerald but Diamond was my first Pokemon game). Even the shiny Raikou I got from the mystery gift event; I never have used as it is still level 30. If I ever have the time to rerun Heartgold or Soulsilver, I may need to use this Pokemon just to because.

Pokedex Entry:

Alright, the Ho-oh myth is still in tacted after reading's Raikou's pokedex entry. According to the Pokedex, Raikou carries a rain cloud on its back (I'm assuming the purple thinggy on its body) allowing Raikou to shoot thunderbolts at will. Furthremore, it is known that its bark sounds like crashing thunder. Well, those are the two entries for Raikou. After reading the entries, I am given the vibe that Raikou is just Zeus but as a dog. Just my two cents.

Model Details:

Pages: 2

Height: 2.85 in / 7.24 cm

Width: 1.85 in / 4.70 cm

Depth: 4.27 in / 10.85 cm

Download:3D Model / Templates

Notes: This model is not too difficult to build. Build the head, body, and other parts separately and attach them together once you are done building. Before closing the body, place a small weight inside so the model can stand by itself. Besides that, I hope you enjoy building and stay tuned!

Chibi Croconaw

 

Commentary:

It died to Whitney's Miltank😡. If you don't understand go read Totodile's entry. It's shiny looks cool though.

Pokedex Entry: 

I like this Croconaw's entry. It only has one in all its game. According to the pokedex, when Croconaw bites down, it will not let go until it loses its fang. A new fang will quickly grow in its space. Pretty cool😃.

Model Details:

Pages: 1

Height: 2.50 in / 6.35 cm

Width: 1.43 in / 3.63 cm

Depth: 2.10 in / 5.33 cm

Notes: Down below I have included a video of me making the model so you can see everything I did to make the model. Something that may be unclear in the video is that for the fangs I just cut some scrap paper into triangles and glued them in the general locations of the fang. There is the option to make the fangs 3D there is the option to, but I'm lazy😎. Also, for the red spikes I did not use the tabs but rather cut out the designated spike and glued and folded along the line of symmetry. Besides that I hope you enjoy building and stay tuned!

Download: 3D Model / Templates

Chibi Marshtomp

 

Commentary:

I always forget Marshtomp is ground type. I know that Swampert is a ground type and Mudkip is not, but Marshtomp is in between so I always forget. I have no funny or interesting story to tell about Marshtomp, since it is a middle evolution, so I thought I try to find a cool set on Smogon. Yeah, there is nothing posted for Marhstomp regarding movesets, so instead, a cool fact though is that takes about 5140 to 5396 steps for Marshtomp hatch time. I'll let you sit on that... 

Pokedex Entry:

Here me out, Marshtomp is Pokemon's equivalent of a pig, but as a water type. According to the Pokedex, Marshtomps lives in muddy grounds, like pigs, and enjoys play in mud, like pigs but, on beaches when the ocean tide is low. It plays in mud so much that its legs have adjusted to become sturdy in this substance as well as giving Marshtomp the ability to travel faster in mud that it is at swimming. Furthermore, it burrows deep in the mud to sleep. So basically, my only claim that Marshtomp is a pig is that it lives and enjoys playing in mud, but I am sticking to it. 

Model Details:

Pages: 1

Height: 2.35 in / 5.97 cm

Width: 1.73 in / 4.39 cm

Depth: 1.31 in / 3.33 cm

Notes: This model is straightforward to build. Build the model head down. The only suggestion I have is to use the tail to help the model to stand by itself. Besides that, I hope you enjoy building and stay tuned!

Download: 3D Model / Templates

Chibi Totodile

Commentary:

One day, I wanted to attempt a Pokemon SoulSilver nuzlocke. It had been a few years since I played this game and I wanted to run through the game blindly. I did not know which starter I picked so and I had quite of bit of time on my hands. I decided that the first shiny starter I got would be my starter. I think you will understand where I am going with this, but if you don't, Totodile was that starter.  Yeah...I have a shiny totodile evolution. I would have loved to say that I was able to take all sixteen gym badges and took out arguably the strongest trainer of all time with my shiny Feraligtr by my side. But yeah, I wiped to Whitney Miltanks😪. Sad times. Since then, I transferred that Totodile to another game and I have not touched that game since. And if anyone was wondering, I did manage to successfully shiny hunt for the others starts after I failed this run.

Pokedex Entry:
Totodile has a consistent entry in all games it appears in. According to the pokedex, Totodile has a habit of biting anything with its developed jaw and that even its trainer needs to be careful around it. Furthermore, its jaw can crush anything... wait anything I think you get what I am hinting at. 

Model Detail:
Pages: 1
Height: 2 in / 5.08 cm
Width: 1.22 in / 3.10 cm

Depth: 1.84 in / 4.67 cm

Notes: I'm trying to make building my models easier by making videos, so I have included the video down below. I suggest you subscribe. I do not believe it is too clear in the video, but for the teeth I just cut triangles in 2D from some scrap paper and glued them in the general location of the teeth. Besides that, the model is not too difficult to build, and you will want to include a small weight in the body to make the model easier to stand. I hope you enjoy and stay tune! 

Download: 3D Model / Templates