Chibi Mega Ampharos

 

Commentary:

It is Ampharos with hair. After the YouTuber Haydunn used a Mega Ampharos in one of his teams and named it Jafar all I can think about when someone says "Jafar" is Mega Ampharos and vice versa.

Pokedex Entry:

According to the pokedex, excess energy from mega evolving awakens its long-sleeping dragon blood which allows Ampharos to grow wool it has lost. I did not realize that growing wool makes you a dragon type pokemon, but hey its pokemon.

 

Fun Facts:

1. It has the highest special defense of all electric types

2. Ampharos was a orginally a Dragon type in developement of Gold and Silver.

Model Details:

Pages: 3

Height: 3.20 in / 8.13 cm

Width: 3.08 in / 7.82 cm

Depth: 3.45 in / 8.76 cm

Download: 3D Model / Templates

Notes: This model has a little bit more complex build steps so if you any questions regarding building the model, refer to the video down below. Also, use the white part on the tail with the two legs to crate a tripod allowing the model to stand. Besides that, I hope you enjoy building and stay tuned!

Chibi Mega Garchomp

 

Commentary:

I have no idea how good this Pokémon. Like I have a general idea on what it does. A very strong physical attacker that is a tad slower than Garchomp but has a little more bulk on it. During its time in VGC, despite being OU, I don’t believe many people used this Pokémon because there were so many other Pokémon who could do its job…including normal Garchomp itself since it could carry an item. I could be completely wrong but that is my belief about this Pokémon. Besides that, I do enjoy its shiny and it is a huge upgrade compared to shiny Garchomp(or should I say a normal Garchomp🤪).

Pokedex Entry:

According to the Pokedex, the mega evolution energy has changed its wings and arms into scythes. It swings its scythes carving its opponents up and has the ability to slice the ground into pieces

Fun Fact:

1. This Pokemon resembles the Grim Reaper

Model Details:

Pages: 2

Height: 3.45 in / 8.76 cm

Width: 2.82 in / 7.16 cm

Depth: 3.91 in / 9.93 cm

Download: 3D Model / Templates

Notes: Use the video down below to help you build the model if you are having problems building the model. The only part I did not record was me attaching the triangle pieces to the body. Besides the red cone on the legs, it does not matter which triangle piece you use at any parts. All the triangles are about the same and only a little it difference no one will notice. Besides that, I hope you enjoy building and stay tune!

Chibi Mega Sceptile

 

Commentary:

It looks like a Christmas tree on its tail. That is all I think about when I think of this Pokemon. I just did a quick search on smogon to see if Mega Sceptile was usable in competitive Pokemon (it isn't as it is in NU tier) I was surprised that its ability is Lightning Rod. Huh? why does it have the ability Lightning Rod it just seems off. Unless, its tail works something like a Christmas tree and can conduct electricity I don't understand its ability.

Pokedex Entry:

🤷‍♂️

Fun Facts:

1. It has the highest speed of all Dragon type Pokemon

2. It has the highest special attack of all grass types

Model Details:

Pages: 2

Height: 3.10 in / 7.87 cm

Width: 1.81 in  / 4.60 cm

Depth: 3.94 in / 10.01 cm

Download: 3D Model / Templates

Notes: This model isn't too difficult, just a lot of pieces. I made the leaves attached to the tail and spikes on its arms 2D with the other pieces being 3D. This just saved me time while quality is not sacrificed. If you have questions about the model, refer to the video down below. Besides that, I hope you enjoy building and stay tuned!

Chibi Reshiram

 

Commentary:

Cool looking Pokemon, but I never used this Pokemon so that is the end of this section.

Zekrom

Black Kyurem

Kyurem

White Kyurem

Pokedex Entry:

According to the pokedex, Reshiram can create flames from its tail and has the ability to scorch the world with fire and change the world's weather. Like Zekrom, Reshiram likes to help humans, but only those who want to build a world of truth. The savage part of tis Pokemon is that if people ignore truth and become to greedy, Reshiram will burn down their kingdoms😅🔥.

Fun Fact:

1. Reshiram has the same stat total as Dialga, Palkia and Giratina as well as Zekrom

2. Reshiram resembles a Wyvern and a hint of birds, pterosaurs and canines.

Model Details:

Pages: 2

Height: 3.70 in / 9.40 cm

Width: 4.47 in / 11.35 cm

Depth: 4.93 in / 12.52 cm 

Download: 3D Model / Templates

Notes: The only difficult part of this model is building the head. I would highly recommend using Pepakura Viewer to see where everything is attached or watch the video down below for some help. If you are building this model without lines, I would recommend that you fold the areas in which there is suppose to be lined. For the neck rings I decided not to build them but they are in the templates if you want to build them yourself. Lastly, to get the model to stand by itself, I recommend playing with teh angle of the tail. Besides that, I hope you enjoy building and stay tuned!

Chibi Arbok

Commentary:
Back in Pokémon platinum I wanted to catch every Pokémon in the national dex. One of the ways I thought as a kids to obtain some Pokémon was to use the GTS system. I needed a unique Pokémon that other trainer may want so I could get Pokémon I wanted. I knew that in order to get Arbok I had to have FireRed in the game boy slot of the D.S. So I caught a lot of Arbok. I would before I go to school put an Arbok on the GTS for a Pokémon I wanted and then come back at night to receive the Pokémon I wanted. I don’t know why, but it worked every time for every Pokémon and I got every Pokémon I wanted (including legendaries in which I found weird) So yeah all I remember Arbok was for fodder for other Pokémon

Ekans

Pokédex Entry:
Overtime, the amount of Arbok patterns have increased from 6 to 20. Arbok uses these patterns to intimidate its prey and then constricts them using a force that can crush steel drums.

Fun facts:
1. Arbok is based on the Indian and king cobra
2. Arbok is in the dragon egg group and knows the move glare. This may refer to the basilisk

Model Details:

Pages: 1

Height: 2.40 in / 6.10 cm

Width: 1.96 in / 4.98 cm

Depth: 2.67 in / 6.78 cm

Download: 3D Model / Templates

Notes: this model is not too difficult to build. Refer to the video below if any part is giving you problems. Besides that, I hope you enjoy building and stay tune.

Pat Futsy

 

Commentary:

Like most of the towers not in Bloons Tower Defense 5 I never used this tower. When I first saw this monkey I was like ah the Dart Monkey decided to go to the gym and exchanged its dart for learning some sort of karate style

Entry:

This monkey costs 610, 720, 780, or 865. The main attack of Pat Futsy is to slam its fist on to bloons causing some splash attach in the process. At max level, Pat Futsy gain two abilities. The first ability is known as Rallying Roar in which all towers can pop 1 extra layer for 8 seconds. Its other ability known as the Big Squeeze which grabs a MOAB, BFB or ZOMG and crushes it in 5 seconds.

Model Details:

Pages: 3

Height: 3.85 in / 9.78 cm

Width: 4.32 in / 10.97 cm

Depth: 3.53 in / 8.97 cm

Download: 3D Model / Templates

Notes: This model is not difficult to build. All parts of the model are individual objects so you can pose this model in any way you want. If you are going to glue the parts to make a different pose, use the tail and legs to create a tripod to get the model to stand by itself. I have included a video of me making the model down below. Besides that, I hope you enjoy building and stay tuned!

Chibi Zekrom

 

Commentary:

Cool Pokémon, preferred it over reshiram and actually had it on my team during the first run of Pokémon white. It was pretty good and I enjoyed using it. Unfortunately this would be my last legendary Pokémon I would use on any team

Pokedex Entry:

According to the Pokédex, Zekrom can scorch the earth with lightning and flys around unova in a lightning cloud. Zekrom creates electricity through its tail and wants to assist those who want to build an ideal world. Ideal world in someone’s perspective (so like Thanos) or ideal world in Zekroms perspective.

Fun Facts:

1. Zekrom has the highest base attack stat of all electric types

2. Zekrom and Reshiram is based on the concept of Yin and Yang

3. Zekrom is the heaviest Electric type Pokemon

Model Details: 

Page: 2

Height: 3.75 in / 9.53 cm

Width: 4.74 in / 12.04 cm

Depth: 4.33 in / 11.00 cm

Download: 3D Model / Templates

Notes: This model is not too and to build. Refer to the video down below if you need help building the model. Some specific details regarding this model is to color the back of a tail piece that looks like this [ color the white side of this piece so match’s the tail color. Also you do no need to place a weight in the model to get the model to stand. Play with the angle of the tail to get the model to stand by itself. Besides that, I hope you enjoy building and stay tuned!

Chibi Ekans

 

Commentary:
Just a Pokémon I forget about. Never used it before but it was recommended by someone so before I forget about this Pokémon again I minus will release it.

Pokédex entry:
Basically, this Pokémon is just a snake (well makes sense by its snake backwards).
 According the Pokédex, ekans silently hunts in the grass to sneak on it prey and can freely detach its jaw to eat its prey whole. It enjoys looking for pidgey and spearow eggs. It is also mentioned that the older ekans becomes the longer it becomes, and when it is resting, it curls up.

Fun Fact
1. Ekans was originally called arbo in the beta
2. Ekans is one of fourteen Pokémon in Pokémon diamond and pearl in which you can collect a foreign Pokédex entry

Model Details:

Pages: 1

Height: 1.64 in / 4.17 cm

Width: 1.09 in / 2.77 cm

Depth: 2.56 in / 6.50 cm

Download:  3D Model / Templates

Notes: this model is not too difficult to build. Just build the head and the body and then attach them together. To get the model to stand place a small weight in the body.

Chibi Hisuian Zorua

 

Commentary:

I messed up the numbering a few months ago so I decided to fix it now. Don't worry about it, but 5 points to what Harry Potter house you are apart of if you can fine between which two models I messed up on. Anyways, this is my favorite Hisuain version out of the new forms. Its shiny makes it look even cooler. I don't know anything about how goof this Pokemon is as I have not played Legends of Arceus, but aesthetically this Pokemon is pretty cool.

Recently I worked with Javi-Papercrafts to make a Hisuain Zorua. IF you want to make a more detailed version, you can download the templates here:

Detailed "Alpha" Hisuain Zorua

Pokedex Entry:

According to the Pokedex, Hisuain Zorua was an onced departed soul who returned to Hisuai. Huh? so did a person die and then reemerged in Hisuai, that is what I am assuming this is refering to. I wonder if there is a character this could have been. Originally, I was going to try to make a connection between this Pokemon and the ghost girl in Unova and X and Y, but I feel like that would be a stretch. The Pokedex also mentions that Hisuain Zorua derives its power from resentment which rises as energy at the top of its head.

Fun Fact:

1. Hisuain Zorua is the only normal ghost type in the game.

2. It is based on vengeful ghosts and revenants.

Model Details:

Pages: 1

Height: 3.10 in / 7.87 cm

Width: 2.39 in / 6.07 cm

Depth: 2.84 in / 7.21 cm

Download: 3D Model / Templates

Notes: This model is not too difficult to build. Just remember to place a weight in the model to get the model to stand by itself. If you have any difficulty building the model refer to the video down below. Besides that, I hope you enjoy building and stay tuned!

Chibi Mega Scizor

 

Commentary:

Its Pokemon Ironman. I have to admit I like the versatility of this Mega Pokemon. You can run it as a physical attacker holding the scizorite (I remember once I was like huh what item do I want to give mega Scizor... I hope you get the joke) running sword dances, roost, bullet punch, and knock off. I also do remember people running a defensive Mega Scizor with defog, roost, u-turn, and bullet punch. Besides the versatility of thi Pokemon, I do overall like the design of this Pokemon. I was a huge fan of normal scizor and like many other Megas its mega evolution makes it look cooler.

Pokedex Entry:

According to the pokedex, Mega Scizor arms become diabolical when it Mega evolves and ripping anything to shred with a single pinch. Well according to the Pokedex, Scizor cannot be a Mega for too long as the mega evolution energy may cause an overflow (whatever that means), it may start to melt, or the weight of its pincers become to heavy. So I have come to the conclusion Mega evolution isn't too good for Scizor

Fun Facts:

1. Mega Scizor is tied with three other Pokemon for the Bug-type Pokemon with the highest total  base stat

2. The Scizor line seems to be a parrallel to Steelix

Model Details:

Pages: 1

Height: 3.20 in / 8.13 cm

Width: 2.37 in / 6.02 cm

Depth: 2.55 in / 6.48

Download: 3D Model / Templates

Notes: This model isn't too difficult to build. IF you are building the model lineless, make sure to fold every line of the grey spikes on its forehead. Also, the last thing to attach on this model is the leg in attempt to make a tripod with the body. IF you need help building the model, I have included a video fo me making the model down below. Besides that, I hope you enjoy building and stay tuned!

Chibi Mega Swampert

 

Commentary:

I believe this Pokemon is only good in Rain with its swift swim ability, but besides that, I have no clue about this Pokemon. I have to admit that it is my least favorite hoenn Mega starter. 

Also don't worry about the messed up numbering of 207 and 208 I was orignally going to release them reversed but I forgot I did not have a video for this Pokemon so...oops.

Mudkip

Marshtomp

Swampert

Pokedex Entry:

🤷‍♂️. This has no Pokedex entry, but its biology says that its upper body is much stronger than its lower body, and I could think of one of those bulky guys at the gym with chicken legs🤪.

Fun Facts:

1. Mega Swampert is the only Pokemon with the base stat of 635

Model Details:

Pages: 3

Height: 3.00 in / 7.62 cm

Width: 4.33 in / 11.00 cm

Depth: 4.16 in / 10.57 cm

Download: 3D Model / Download

Notes: Well I made this model a little bit ago.. so there is no video for this model. The good thing there is only one difficult part of the model. Once the entire model is completed, the last thing to do is build the back fin. You will need to cut the fin so that it fits snuggly with the body and allow the model to stand. Each model will be different from each other so do your best when trimming the model. Besides that, I hope you enjoy building and stay tune!

5-5-5 Navarch of the Sea Paragon Buccanear

Commentary:

I wanted to make a boat, I like Bloons tower defense; hence, I made this model. I will have to admit I have never used this upgrade before, but the design is prett good

Entry:

Costing between 425,000; 500,000; 540,000 or 600,000 dollars the Navarch of the sea I'm just going to list all the aspects of this monkey.

• It is armed with 18 turrets which shoots 3 explosive rounds and 10 arrow head shaped graped shots (The grape shot upgrade of the buccaneer is my favorite upgrade for the buccaneer)
• On deck there are 6 grappling hooks that take down MOABs class bloons and uses two of his hooks to pull down a ZOMG bloon. These grappling shoot 10 times before entering a 10 second period (I believe it acts something like the pirate ability). 
• Launches 3 fighter jets that shoots 4 seeking missiles every 10 shots
• Its ability shoots a grappling hook that can take down BAD bloons

Fun Facts:

1. This is the first paragon with an active ability

2.The fighter jets are similiar to the Vic Vipper T301

3.This tower is 1 of 3 monkeys to deal percentage damage on a BAD regardless of health

Model Details:

Pages: 13

Height: 7.45 in / 18.92 cm

Width: 7.91 in / 20.09 cm

Depth: 7.60 in / 19.30 cm

Download: 3D Model / Templates

Notes: This model is quite huge compared to my other models. I have included the templates for one fighter jet as page one of the templates and can be printed as many times you want to make the fighter jet. Refer to the video below if you have questions regarding making the model. Besides that, I hope you enjoy building and stay tuned!