Hello, I'm Crafter Wong and I make Pokemon Papercrafts and BTD 6 models and maybe other stuff if you ask... maybe. I have to admit I'm getting a little burned out with upload so I am going to be taking a break. Don't worry I have posts prepped until the end of August. Don't know if I will return. There are easter eggs around my website on what I'm going to be releasing so have fun finding them!!
Wednesday, May 27, 2020
Wednesday, May 20, 2020
Chibi Regice
Pages: 2
Height: 3.2 in / 8.13 cm
Width: 3.78 in / 9.6 cm
Depth: 3.98 in 10.11 cm
Download: 3D Model / Templates
Notes: This model is pretty simple to build. Build the individual parts and then attach them when everything is built. Make sure to trim the fingers and the back spikes to your desired length. The model can stand up by itself but at an angle. In order to get the model to stand straight up, I PLACED an extra legs at the back, I did NOT glue it on. Yeah that is about I hope you enjoy building!
Notes: This model is pretty simple to build. Build the individual parts and then attach them when everything is built. Make sure to trim the fingers and the back spikes to your desired length. The model can stand up by itself but at an angle. In order to get the model to stand straight up, I PLACED an extra legs at the back, I did NOT glue it on. Yeah that is about I hope you enjoy building!
Saturday, May 16, 2020
Chibi Shieldon
Model Details
Pages: 1
Height: 2.28 in / 5.8 cm
Width: 1.73 in / 4.4 cm
Depth: 2.82 in / 7.2 cm
Notes: This model took me five tries to build so take your time building this model. Start with the eyes and build the eyebrows next. Then separately build the head and the back of the head. Trim the back of "shield" so that it fits over the back of the model. When attaching the head to the eyes, take your time trimming to eyebrows to fit with the head to your desired look. Besides that, the model is pretty straightforward to build. Place a weight in the body so that the model can stand by itself. Enjoy building this model!
Wednesday, May 13, 2020
Chibi Empoleon
Model Details:
Pages: 1
Height: 2.75 in / 7 cm
Width: 1.81 in / 4.6 cm
Depth: 1.93 in / 4.9 cm
Notes: This model is a little more difficult to build as it took me three tries to complete the build of the model. First off, if you are going off the direction of the PDO, the red lines on the mask and body DO connect to each other; I have made tabs in the model so they do. I was messing with the knife tool in blender to make the textures correct on the model thus the red lines appeared. Building the head is pretty straightforward. When building the body, start with the legs and build up. Attach the neck piece with the two tabs it says to on the PDO and play around with the angle in which you like the neck piece to look like. Lastly attach the black hexagon to the model by the three tabs at the back of the body and trim it so it fits snugly inside the neck piece. Use the tail of the model to make the tripod with the legs and get the model to stand up the way you want it to. As you can see, the model is a little difficult to build, so take your time and enjoy building!
Wednesday, May 6, 2020
Turbo Charge Boomerang Monkey
Model Details:
Pages: 2
Height: 2.76 in / 7 cm
Width: 2.29 in / 5.8 cm
Depth: 2.03 in / 5.2 cm
Notes: The model is pretty straight forward to build. You will need to trim both ears and the eye piece to make the model look natural. Furthermore, there is a natural bend in the body in order to fit the left arm correctly in place. Again like the other boomerang model you do not have to attach the legs exactly like the PDO says. Close the model by attaching the legs in any way too allow the model to stand using the tail to make a tripod. Hopefully you enjoy building!
Wednesday, April 29, 2020
Chibi Groudon
Model Details:
Pages: 2
Height: 3.64 in / 9.25 cm
Width: 2.47 in / 6.27 cm
Depth: 4.57 in / 11.6 cm
Notes: The head is straightforward to build. For the body START with the tail and work your way up to the neck. Do not completely close the model at the top of the neck. There are two tabs, out of the five possible tabs, on the last piece in which you will not connect to make the model look better. Once that piece is connected through its three other tabs, attach the head onto the body to make it look better. Besides that enjoy building!
Saturday, April 25, 2020
Chibi Beduw
Model Notes:
Pages: 1
Height: 2.25 in / 5.7 cm
Width: 1.28 in / 3.25 cm
Depth: 1.31 in / 3.32 cm
Model details: This model is very straightforward to build. To get the model to stand, invert part of the feet so instead of making a point for the legs, create the point inside the body so that there exists a tripod that allows the model stand. Besides that enjoy building!
Wednesday, April 22, 2020
Falco Kirby
Model details
Pages: 2
Height: 3.07 in / 7.8 cmWidth : 3.14 in / 8 cm
Depth: 2.98 in / 7.56 cm
Download: Templates
Model Notes: I was trying to learn how to make a model low-pol and the textures became messed up when making it low-pol and I do not know how to fix it so the 3D model is funky thus I do not think anyone would want. Also, by the time I learned how to alter the model's home view in Blender I already finished making the model and I did not want to re-make the templates, which took about an hour, so use the right-mouse button to alter the view of the 3D model in Pepakura. Besides that the model is quite simple and easy to build. Enjoy building!
Wednesday, April 15, 2020
Sunday, April 12, 2020
Chibi Cyndaquil
Model details:
Height: 2.36 in / 6 cm
Width: 1.52 in / 3.86 cm
Depth: 2.17 in / 5.5 cm
Notes: This model is probably one of the easiest Pokemon to make just be careful building the fire and making sure the model can stand with the head on top besides that... Enjoy building!
Wednesday, April 8, 2020
Boomerang Monkey (x-x,-x)
Model Details:
Pages: 2
Height: 2.78 in / 7.06 cm
Width: 1.90 in/ 4.83 cm
Depth: 2.36 in / 5.99 cm
Notes: The model is somewhat difficult to build. Follow the PDO to help build the body and arms. I decided to make the red V on the head 2D but if the files have the V has a 3D parts so you can decide how you want to make it. Also, I trimmed the ears so they are not so large. Furthermore, advice for closing the model, attach the legs last and fiddle with their positioning to get the model to stand (the tabs do not have to completely match up to make the model look nice). Use the tail to make a tripod to help make the model stand up. Besides that Enjoy building!
Subscribe to:
Posts (Atom)