Boomerang Monkey (x-x,-x)

Model Details:

Pages: 2

Height: 2.78 in / 7.06 cm

Width: 1.90 in/ 4.83 cm

Depth: 2.36 in / 5.99 cm

Download: 3D Model / Templates

Notes: The model is somewhat difficult to build. Follow the PDO to help build the body and arms. I decided to make the red V on the head 2D but if the files have the V has a 3D parts so you can decide how you want to make it. Also, I trimmed the ears so they are not so large. Furthermore, advice for closing the model, attach the legs last and fiddle with their positioning to get the model to stand (the tabs do not have to completely match up to make the model look nice). Use the tail to make a tripod to help make the model stand up. Besides that Enjoy building!

Chibi Greninja

Model Details:

Pages: 1

Height: 2.8 in / 7cm

Width: 3 in / 7.7 cm

Depth:  1.6 in / 4.1 cm

Download: 3D Model /Templates

Notes: The model is a pretty simple typical build, but I could not get the model to stand by itself. If you find a way to get the model to stand put it in the comments below, so we can all benefit from this information below. Besides that enjoy building! Also, if you want like to see a specific build for a Pokemon leave it in the comments section below.

Chibi Vaporeon

Model Details:

Pages: 1

Height: 2.5 in / 6.4 cm

Width: 2.4 in / 6.1 cm

Depth: 2.8 in / 7.1 cm

Download: 3D Model /Templates

Notes: The model is pretty straightforward to build just add a small weight at the back of the model in order to get it to stand by itself. Besides that...enjoy building!

Chibi Ho-oh

Models Details

Height: 3 in / 7.6 cm

Width: 3.5 in / 8.9 cm

Depth: 4 in / 10.2 cm

Download: 3D Model / Templates / Bigger Templates

Notes: The model seems pretty straightforward. You may want to cut the top part of the neck to make it easier to connect the head to the neck. Also, add a weight in the back of the model and angle the tail to get the model to stand properly. Lastly, I decided to make the 3D model of the Pokemon downloadable, under 3D model, and the templates are downloadable under download. Besides that enjoy building! 

Chibi Lugia

Model Details:

Pages: 1

Height: 2.24 in / 5.7 cm

Width: 3 in / 7.62 cm

Depth: 4.16 in / 10.6 cm

Notes: Build the body and head separately. In order to get the model to stand, put a weight near the legs and use the tail to make a tripod with the legs to make the model stand. Glue the head on as if you are making the PDO then tilt it until it reaches the desired angle.I still do not know how to make the back hairs the same color so you will need to print the back hair twice and connect them back to back so the color is on the outside. Enjoy building!

Download: 3D Model / Templates / Bigger Templates

Chibi Palkia

Model details:

Pages: 3

Height: 4 in / 10.2 cm

Width: 3.7 in / 9.4 cm

Depth: 6 in / 15.2 cm

Notes: The model is pretty straightforward. You may need to trim the neck add-on to fit the back of the body and add a small weight near the back of the model to get it to stand by itself. Besides that enjoy building!

Download: 3D Model / Templates

Captain Falcon Kirby

Model Detail:

Pages: 2

Height: 3 in / 7.6 cm

Width: 3.3 in / 8.3 cm

Depth: 2.77 in / 7 cm

Download: Templates

Notes: The model is quite straightforward. The only problem that may occur is attaching the body to the helmet. I suggest attaching the top part of the body to the top part of helmet and then finish attaching the part at the bottom of the helmet. Besides that have fun building!

Chibi Rhydon

Model Details:

Pages: 1

Height: 2.7 in / 6.9 cm

Width: 1.9 in / 4.8 cm

Depth: 3.6 in / 9.1 cm

Notes: The model is pretty straightforward to build. You might want to trim the horn on its head in order for it to glue easily on the head. Besides that enjoy building!

Download: 3D Model / Templates

Chibi Gyarados

Model Details:

Pages: 1

Height: 2.5 in / 6.4 cm

Width: 2.1 in / 5.4 cm

Depth: 3.8 in / 9.7 cm

Notes: The model is pretty simple to build. Attach the head to the shoulderish piece on the white line. There exists a optional piece on the body I personally did not use it. Place a weight inside the body and make distinct folds in the middle of the model to get it to stand. For the fins and body pieces I did not know how to get both sides white so for the body pieces just cut out the white part and for the fins print another page and attach the white pieces together. Besides that enjoy building!

Download: 3D Model / Templates

Fox Kirby

Model Details

Pages: 2

Height: 3.23 in / 8.2 cm

Width:  3.41 in / 8.7 cm

Depth: 2.47 in / 6.3 cm

Download: Templates

Notes: Attaching the ears and hair to the body is kind of challenging. The way in which I did it was building the ears and hair separately from the body, attaching both the ears to the hair. Then I attached the front part of the ears and hair to the body and then glued the back part to the body. Besides this the model is pretty straightforward to build.

Chibi Scizor

Model details:

Pages: 1

Height: 3.0 in / 7.62 cm 

Width: 1.89 in / 4.8 cm

Depth: 2.41 in / 6.12 cm

Notes: The model is pretty straightforward to build. In order to get the model to stand create a tripod with the two legs and the body

Download: 3D Model / Templates