Chibi Mew

 

Commentary:

I have never catched this Pokemon in any main series game, but after I learned how to get free Pokemon from the GTS I got like 5 of them. Yes, I believe they are all legit as they are not plugging any website or anything along that. I believe Mew is alright in competitive Pokemon as it has 100 base stat in every category. This base stat allows Mew to be whatever best fit your team so that is why I am assuming mew is alright. Also...this Pokemon is so cute and I like it. Such a cute Pokemon able to pack a huge punch

Mewtwo

Pokedex Entry:

According to the pokedex, Mew is from South America (yes, the pokedex says South America which is kind of surprising. Pokemon Stadium and Pokemon FireRed says this.) and its DNA contains the genetic code of all Pokemon. Only few people have seen this Pokemon as it only appears to people who are pure of heart and have a strong desire to see it. Surprisingly, this Pokemon has quite small hairs on its body in which can be seen through a microscope

Fun Facts:

1. This Pokemon is only a foot tall

2.Despite being genderless, Mew can learn attract

3. Mew was voted the most popular Pokemon in the from the first four generations

Model Details:

Pages: 1

Height: 2.15 in / 5.46 cm

Width: 1.62 in / 4.11 cm

Depth: 2.34 in / 5.94 cm

Download: 3D Model / Templates

Notes: This model is not difficult to build. The only difficult part to build is the tail. Make sure that the glue on each tab is fully dried before moving on to the next tab. Once built, use the tail to get the model to stand by itself. Besides that, I hope you enjoy building and stay tuned!

Chibi Mega Gallade

 

Commentary:
I have no knowledge of this Pokémon. I assume that Mega Gallade just has really high attack. All I have to say is the design looks pretty cool

Pokédex entry:


Fun facts:
1. This Pokémon can only be male(I mean I assume everyone knew this already)
2. Mega Gallade has the highest attack of all non-legendary psychic type Pokémon.

Model Details:

Pages: 2

Height: 3.70 in / 9.40 cm

Width: 2.18 in / 5.54 cm

Depth: 2.14 in / 5.44 cm

Download: 3D Model / Templates

Notes: Just like the Gallade model this model is somewhat tricky to build. Building the head is similar to every model in this series. First build the green part of the head, then glue the side pieces to the head, then lastly build the rest of the head. Moving on the body, build the body through the top down but DO NOT GLUE the legs to the body. Fold on all the tabs into the body and then glue the saucer to the body and the legs after that. Lastly, make the cape and use it to get the model to stand by itself. Besides that, I hope you enjoy building and stay tuned!

4-x-x Banana Factory

 

Commentary:

I used to use this Banana farm upgrade in BTD5 all the time, but when BTD6 came out Ninjakiwi seemed to nerf this upgrade and more importantly changed the design for this upgrade. I'm fine with Ninja Kiwi nerfing this upgrade because it did seem a bit overpowered, but I have no idea why they changed the design of this upgrade. I actually liked the BTD5 tower upgrade as it looked more like a factory than this work. This isn't that huge of an issue but just my opinion of the change.

Entry:

This upgrade produces 5 creates of $300 every round. The cost of this upgrade for each difficulty is list down below

• Easy: 16,150
• Medium: 19,000
• Hard: 20,520
• Impoppable: 22,800 

Model Details:

Pages: 5

Height: 7.00 in / 17.78 cm

Width: 5.08 in / 12.09 cm

Depth: 3.85 in / 9.78 cm

Download: 3D Model / Templates

Notes: This model is very easy to build, the only difficult part of this model is building the roof. My only recommendation for the roof is to fold every line on it and the tab should line up from there. Besides that this model is quite simple and I hope you enjoy building and stay tuned!

Chibi Mega Gardevoir

 

Commentary:

Pixelate and hyper voice. When set up properly, this Pokémon could sweep through teams just by using hyper voice. I don’t know how good Mega Gardevoirs special defense is but it could take some neutral attacks pretty well but it my experienced it would faint on the spot if anything super effective hit it. I could just be completely wrong about Mega Gardevoir and it’s ability to tank hits but in my experience it was meh.

Pokédex Entry

Fun facts:
1. Mega Gardevoir has the highest special attack among fairy types
2. I personally didn’t know this but is champion Diantha’s main Pokémon (didn’t play kalos region games so that may explain it)

Model Details:

Pages: 2

Height: 3.20 in / 8.13 cm

Width: 2.43 in / 6.17 cm

Depth: 2.68 in / 6.81 cm

Download: 3D Model / Templates

Notes: This model is somewhat difficult. If you made Gardevoir, this model is very similar to it. For the end, build the top green section, then attach the side horns and the rest of the head. For the body, build the body downward. Once the body is complete, build the skirt/dress part. There are two sets of dresses. One for the inside and one for the outside. I was lazy and I only made one, but there are two if you want to make the shiny and don't want to see the inside white part of the cape. You will need to wrap the dress around the body and glue the cape together, rather than, making the dress and trying to put the body inside the cape. Besides that, I hope you enjoy building and stay tuned!

Chibi Kirlia

Commentary:

Just a Pokémon I had to use to get Gardevoir, it was alright but nothing special. Don’t really have anything else to say about this Pokémon.

Pokédex entry:
According to the Pokédex, it’s trainer cheerful spirit provides Kirlia with energy to power its psycho kinetic power. This psycho kinetic power allows Kirlia to seen into the future and distort the world around it by creating a mirage of fake scenery.

Fun Fact:
1. This Pokémon is based off of a ballet dancer
2. The horns on Kirlia’s head is to amplify its psycho kinetic powers.

Model Details:

Pages: 1

Height: 2.30 in / 5.84 cm

Width: 1.79 in / 4.54 cm

Depth: 1.51 in / 3.84 cm

Download: 3D Model / Templates

Notes: This model is not difficult to build. For the end, just build the green section and then glue the white section to the head. Besides that, this model is not difficult to build, so I hope you enjoy building and stay tuned!

Chibi Gallade

Commentary:
Let me be honest, I had no clue that I needed a male Kirlia in order to get it to evolve into a Gallade. I hundred percent just got lucky and the only Kirlia I had was male. I mean the chances are 50/50 so it’s not out of the chance of probability. Whenever I used this Pokémon, I just remember spamming leaf blade, psycho cut or close combat and doing chunks of damage out of Pokémon. It’s a shame that I didn’t think of teaching Gallade swords dance as I would have just needed to set up once and just sweep.

Pokédex entry:
According to the Pokédex, Gallade is a master in swordsmanship and courtesy. Because Gallade can sense what’s it foe is thinking, Gallade can burst out first, fast and fierce. Gallade only perform these attacks in an act of defense by using is swords like arms

Fun facts:
1. Gallade has the reversed attack and special attack as Gardevoir
2. Gallade is the only fighting type Pokémon in the amorphous egg group

Model Details:

Pages: 1

Height: 3.60 in / 9.14 cm

Width: 1.87 in / 4.75 cm

Depth: 2.04 in / 5.18 cm

Download: 3D Model / Templates

Notes: Making the face of this model is quite similar to making Gardevoir face, so.... you can read that section to make this model. The two importants I have regarding this model is when you are making the model. 

            1. When making the legs do not attach them directly to the body. Glue the circular waste to the                  body then glue the legs to the circular waste.

            2. After the entire model is glue together, angle the pyramids at the back of the legs to get the                     model to stand by itself.

Besides that, I hope you enjoy building and stay tuned!

Chibi Ralts

 Commentary:

I hated catching and training this Pokemon. I remember that you could catch Ralts really early in the game (Route 102). It took forever to fine one (after looking it up it is 1%) and was quite difficult to train. For some reason I thought it knew teleport making it even harder to catch. Unfortunately, my memory is just wrong as Ralts never learns teleport until level 16 so yeah... it never used teleport, and it learns confusion at level 6 so in theory it should have been hard to train. SO I do not know how my brain pulled this "memory" out of it.

Pokedex Entry:

According to the Pokedex, Ralts can sense the emotion of people with the horns on its head. Ralts do not appear in front of people often, but they are typically drawn to positive deposition and a cheerful attitude (welp so if I was in the Pokemon universe, I don't think it would appear in front of me).

Fun Facts:

1. Ralts has the lowest base stat total of all psychic type Pokemon

2. Ralts is based off of the concept of empathy

Model Details:

Pages: 1

Height: 2.00 in / 5.08 cm

Width: 1.29 in / 3.28 cm

Depth: 1.75 in / 4.45 cm

Download: 3D Model / Templates

Notes: This model is not too difficult to make. There are just a few small pieces in the head but I think you guys are smart enough to see where they all go. For the body build it from the arms down and close the model with the top piece of the body. Besides that, I hope you enjoy building and stay tune!

Chibi Gardevoir

Commentary:

I'm not a huge fan of Gardevoir being like a waifu, but I do like using Gardevoir in runthroughs. I only used it in Pokemon Emerald but I remembered that it evolved quite early in at level 30, (I was quite surprised when it evolved at that level) it has quite good type coverage with thunderbolt and shadow ball, and can pack quite a punch with its 165 special attack. Overall, I like using this Pokemon in battle, but I am not the biggest fan of its design.

Pokedex Entry:

According to the Pokedex, Gardevoir has the power to predict the future and it will protect its trainer with its life. \

Fun Facts:

1. Gardevoir has the reverse special attack and attack of Gallade

2. Gardevoir has the power to create a blackhole

Model Detail:

Page: 1

Height: 3.00 in / 7.62 cm

Width: 1.81 in / 4.60 cm

Depth: 2.45 in / 6.22 cm

Download: 3D Model / Templates

Notes: I have the footage for this model, I just don't know when I am going to get around to making the video. In general, this model is kinda of difficult to make. First thing you are going to do is make the green section of the face. Then you are going to make the eyes section attaching the side spikes to the white part of the head before attaching it to the green part. You will then close the head at the bottom of the head. Next to you make the body of the model by working from the top down. After. you are going to make the skirt by glue the white section the white side of the green section. Lastly, you are going to wrap the skirt around the body and glue the skirt to each other to get it to stay. Hopefully, this helps. Besides that, I hope you enjoy building and stay tuned!