Chibi Salamence

Commentary:

 I really like Salamence as a Pokemon. Too bad that it dies if an ice-type sneezes its way, and like any pseudo-legendary Pokemon, in my opinion, you get it too late into the game. Salamence was my first Pokemon that I ever trained to level 100 in any Pokemon game. I remember I trained this Pokemon in Emerald's Victory Road for many weeks. I use to believe attaching the exp.share to the main Pokemon would give it more experience each battle. So one day, I ran into a Hariyama who knew knock-off and I saw that I had "lost" my exp.share. I believed that I had completely lost the item. and was in complete panic mode as I knew the player only recieved one exp.share per game. After the battle, I checked if Salamence still had the item after the battle and relieved that the exp.share was still on Salamence. Yeah for some reason, I believed that a Pokemon using knock-off in game meant that you lost the item permanently instead of temporarily.

Model Details:

Pages: 2

Height: 1.82 in / 4.63 cm

Width: 2.88 in / 7.32 cm

Depth: 4.95 in / 12.57 cm

Download: 3D Model / Templates

Notes:  This model is pretty easy to build. To make the wings I just folded the wings on top of each other so there was red on both sides of the wings. Also, the red lines on Pepakura do connect to each other in the build. My only advice is to put a weight at the back of the body. I forget to do this when I built my model and it still stands but it falls over much easier without a weight in the back. Besides that, enjoy building and stay tune!

Chibi Eevee

Commentary: 

Eevee is one of those real cool and cute Pokemon. I really like the idea of having a Pokemon that can evolve into a different type Pokemon based on the user's desire, and it looks so cute that I just want to hug it. For those who play Pokemon Go, there exists a "hack" where you can name the Eevee a certain name and it will evolve into the desired evolution in which you want. I did not know that each name was a onetime use for this "hack." To this day, I still use this name "hack" and I get the desired Eeveelution I want. I am either very lucky or my game is glitched I do not know which one it is, and I am not going to complain.

Model Details:

Pages: 1

Height: 2.20 in / 5.59 cm 

Width: 2.37 in / 6.02 cm

Depth: 2.40 in / 6.10 cm

Download: 3D Model / Templates

Notes: This model is very simple to build that I do not have any notes regarding building. Instead, I have a few questions for you. I know there exists other Eeveelutions models on the Internet. So, let me know if you still want make me to the other Eeveelutions and/or if you want me to scale up the Eevee so that it looks better with the other Eeveelutions. Besides that, enjoy building and make sure to stay tune!

Dart Monkey

Commentary: 

This is the first monkey you unlock when you first start playing the game. Even though the first few upgrades are pretty poor, once you upgrade this tower to the 3rd, 4th and 5th tier this tower becomes a beast. I like how the first tower unlocked by the player is actually decent throughout the game and does not just fade into the background and become unusable on different levels. 

Model Details:

Pages: 2

Height: 2.75 in / 6.99 cm

Width: 2.17 in / 5.51 cm

Depth:  1.97 in / 5 cm

Download: 3D Model / Templates

Notes: The model is pretty straightforward to build. So when making this model, I forgot to unfold the dart for the monkey at the same time I unfolded the monkey so it is a separate file from the monkey. Also, when making the dart I just cut out a v-shape on a piece of paper and attached it to the dart instead of building the piece in which is suppose to be the tail for the dart. For this model, I folded the tabs in for the legs and free hand glued them to the body in a fashion to get the model to stand (putting them in a way to cause the model to lean backward naturally). Then I glued the tail on to create a tripod with the legs to allow the model to stand. Besides that, enjoy building!

Alolan Vulpix

Commentary:

 I stopped playing the mainline Pokemon games after Blacks and White 2, therefore, I possess no experience using this Pokemon. I even checked my Pokemon Go account to see if I had catched this Pokemon before and I had not. The only reason I wanted to make this Pokemon is because, in my opinion, I think all the alolan Pokemon forms look pretty cool and the this Vulpix, despite smaller, would look cool and cute next to the Vulpix model created by Paperpokes.

Model Details:
Pages: 1
Height: 2.20 in / 5.59 cm
Width: 2.05 in /  5.21 cm
Depth: 2.95 in / 7.5 cm

Download: 3D Model / Tempate
Notes: This model is very straightforward and easy to build. I actually have no suggestions to make regarding this model. So enjoy building!

Chibi Hydreigon

Commentary: 

Before I began playing Pokemon Black, I knew that I wanted to use a Hydreigon in game, and that I also wanted to play the game blindly so all the twists and turns would surprise me. I thought this Pokemon would be any typical pseudo legendary and evolve around level 50 or 55 so I leveled my Zweilous to level 55 and it for some reason it did not evolved. I was like "What?! Why has this Pokemon not evolve? I'll just give it a few more levels to allow it to evolve," yet after a few levels my Zweilous had not evolve. I finally threw in the towel and looked up how to evolve a Zweilous in Pokemon Black. To my surprise it was level 63. To my luck, I happened to pick the Pokemon that evolved the latest out of the Pokemon at that time. I grudgingly leveled up my Zweilous to level 63 and oh man was it worth it. It just tore through the entire elite four. A few years later, when facing Ghetsis in Black 2 when I saw his Hydreigon at level 58 (I think) I was like....🤨.

Model Details

Pages: 1

Height: 3.36 in / 8.53 cm

Width: 3.31 in / 8.41 cm

Depth: 2.86 in / 7.26 cm

Download: 3D Model / Templates

Notes: This model is a little more difficult due to the builds of the heads. Because each head is its own 3D shape you need worry on how to close each. In order to accomplish this feat, build half of each mane then attach the head and close each head by attaching the other half of the mane. In order for the model to stand-up properly I closed the slot in which the tail is supposed to be attached (by covering it with a sheet of paper with the same color as the body) and I glued the tail on the back to create a tripod with the two legs. This takes away Hydreigons hunch, but it allows the model to stand by itself, so it is up to you on how you want to build it. Hopefully, you like the model and enjoy building!

Lego Captain America

Commentary: 

I wanted to try something different for a change, so I decided to make my one of my favorite superheroes in Captain America. I do no know how many more I will be making of these but I will do my best to continue making different heroes in a somewhat Lego form. One thing I never understood about this character is why did no one ever shoot at his Cap's legs. I mean this joke was covered in Captain America Civil War, but I always had to this question prior to the movie. Also, how does he always have the shield come back to him when he throws it. I always assumed that he "calculated" the right angle to throw the shield so that it would come back to him. I guarantee if I threw the shield I would just end up breaking a window and losing it but whatever... it is a movie.

Model Details:

Pages: 3

Height: 4 in / 10.2 cm

Width: 3.63 in / 9.22 cm

Depth: 2.44 in / 6.2 cm

Download: 3D Model / Templates

Notes: The body and legs are pretty straightforward to build. The next parts are difficult to build as I had to build these parts 3 or 4 times so take your time

For the head there is a very thin circular piece attach it to the piece above it before starting to build the model. Besides that the head is pretty easy to build, close it with the piece with the big circle located at the bottom of the page

For the shield I built it without the thin circular and line piece by just gluing the shield to the red circle and trimming around the edges to clear the white out parts. I have left the pieces in the model just in case you want to use them.

Lastly for the arms. Build each piece separately. I did not use the tabs when attaching each part of the arm together as I just made sure the piece just hid the tabs. For the arm, start building at the forearm and work your way up to the shoulder and close it there making sure the white parts are covered.

If you read this entire sections I thank you, and you deserve a cookie anyways... Enjoy building!

Chibi Arceus

Commentary: 

Hey everyone, yes I am going to juice Arceus and releases each type separately (This is mainly cause I want to make an army of Arceuses of different colors... so yeah). Anyways... I was always wanted to catch this Pokemon in Platinum as I knew there was a way to catch, but I did not know how. I looked all over the Internet trying to figure out how to catch this Pokemon and I believed that there was a legitimate way of catching it. I probably spent a few weeks as a little kid searching how to catch this Pokemon to no avail. I gave up and just used an action replay to obtain an Arceus.  Little did I know that catching Arceus required a mystery gift that was given out years ago and I there was no way to obtain Arceus.

Model Details:

Pages: 3

Height: 4 in / 10.16 cm

Width: 2.53 in / 6.43

Depth: 4.08 in / 10.36 cm

Download: 3D Model / Templates

Notes: The body and head are simple and easy to build. The difficulty arrives when building the rings. I will do my best to explain. If you have questions regarding how to build this part feel free to ask it in the questions below. When building the rings flip the model around in Pepkaura Viewer and build each ring as if it is the back of the ring. Follow the PDO model for each piece goes and you may have to make a judgement call (puns😂) on where to attach each piece as there may not be a given connection. When done building both rings one side should be completely white and the other side should be yellow. There exists a yellow square on the third page for the next section. Glue the white part of the ring to the white part that aligns with the yellow square. Both rings should fit inside the square. Lastly cut out the ring side with the green gem and you should have two rings that have yellow on both sides. This part is probably the most difficult. Again, if you have any questions leave it in the comments below and enjoy building!

Chibi Rattata

Commentary:

 Hello everyone! This model was technically the first Pokemon in which I generated the 3D Model and unfolded it to make the templates. Because it was the first model I made this model probably took me over a hundred hours just to make a basic Rattata model, as I had to learn how to use new programs. I decided to release this model now as it is following the other og Pokemon you would find on Route 1. Let me honest I have never used Rattata or Raticate in Pokemon so I do not have any good or bad opinions regarding the Pokemon

Model Details:
Pages: 1
Height: 2.05 in / 5.2 cm
Width: 2.26 in / 5.74 cm
Depth: 3.04 in / 7.72 cm

Download: 3D Model / Templates
Notes: This model is really easy and straightforward to build. My only advice is to add a weight at the back of the model to allow the model to stand by itself .Besides that...enjoy building!

Chibi Pidgey

Commentary: 

It is the og bird Pokemon you find at the beginning of the game. When I first started playing Pokemon I was actually excited to use a Pidgey during my playthrough of Firered, but I soon learned the uselessness of this Pokemon. I remember evolving Pidgey all the way up to a Pidgeot and leveling it up to level 55 and being disappointed that it only knew flying and normal type attacks. So after that run I never have used a Pidgey since. I have not played the newer games so I do not know if mega-pidgeot is any good.

Model Details:

Pages: 1

Height: 2.35 in / 6 cm

Width: 2.10 in / 5.3 cm

Depth: 2.32 in / 5.9 cm

Download: 3D Model / Templates

Notes: This model is not to hard to build just angle the model not perfectly straight on and use the tail piece to get the model to stand up. You may also want to trim the beak so it is not that long. Besides that enjoy building.

Chibi Milotic

Commentary: 

I never discovered this Pokemon until generation 5 when I could easily obtain it through trading it with a prism scale. Before that, I never knew how to make Pokeblocks or poffins to evolve a feebas (Yes I got lucky in Emerald and captured a Feebas without really too much effort in to it). Currently, Milotic is one of my favorite Pokemon to use as a special defensive tank with its ability marvel scale and the set of scald, ice beam, toxic and recovery. Looking back I found two shiny Milotics on Pokemon Black account. I have no clue where it came from so it is up to you on how you interpret it.

Model Details:

Pages: 1

Height: 2.8 in / 7.2 cm

Width: 2.4 in / 6 cm

Depth: 4 in / 10.2 cm

Download: 3D Model / Templates

Notes: This model is pretty straightforward to build just cut off the tabs on the head antennas and fold the piece over itself to get the desired shape. Glue the two pieces of the antenna together (without the tabs) to whatever angle you want. Place a weight in the model to allow the model to stand by itself. Besides that enjoy building!

M.O.A.R Glaives Boomerang Monkey

Commentary: 

I just decided to make all 4th tier towers of the boomerang monkey and this was the next one on the list. I personally never use this tower in game as I actually do not know the strengths or weaknesses of this tower. I am assuming that it is good group bloon popping power, but I prefer to use other towers to accomplish that job.

Model Details

Pages: 2
Height: 2.76 in / 7 cm
Width: 2.09 in / 5.3 cm
Depth: 2.42 in / 6.2 cm

Download: 3D Model / Templates
Notes: The body is pretty simple to build as it is similar to the other bloons tower defense monkeys I have built. My advice for the head is to build the hood of the head but do not put the piece underneath it. Before putting the bottom piece on, place the face on the front of the hood and trim it to the desired length so that it fits snugly in the hood. When closing the model just attach the legs and tail last so to get the model to stand properly. Besides that enjoy building!